USB Type-C - VGA-muunnoskaapeli ACT SB0032 2 metriä

The ACT USB Type C to VGA conversion cable (2 meters) connects USB-C devices that support DisplayPort Alternate Mode to VGA displays. The cable has a male USB Type-C connector and a VGA output, and its 2 m length gives flexibility for desktop setups and presentations. The USB Type-C port on the source device must support DisplayPort alternate mode; this is usually indicated by a DP logo near the USB-C port.

Advantages

This ACT USB Type C to VGA cable provides a straightforward analog video output from modern USB-C devices to legacy VGA monitors and projectors. With a USB 3.2 Gen 1 connector it ensures reliable signal transfer and a secure connection with the male USB-C plug. The 2 m length reduces the need for adapters or extenders and the black colour blends with most setups.

Suitable for

Key specifications

How to use

Connect the male USB-C end to a device whose USB-C port supports DisplayPort alternate mode (look for the DP logo near the port). Plug the VGA connector into the VGA input of a monitor or projector. Set the external display mode on your device (extend, duplicate or single screen) through the operating system display settings. If no image appears, confirm the source device supports DP Alt Mode and that the VGA display is switched to the correct input.

Recommendations

Use this cable for video output only; audio is not transmitted over VGA. For best image quality, use the cable without additional passive adapters. Verify device compatibility (DP Alt Mode) before purchase or use.