Verkkokaapeli DeLOCK RJ45 Cat.8.1 90° alaspäin kulma / suora 10 m musta

This network cable by DELOCK is a Cat.8.1 RJ45 cable with a length of 10 m, designed for high-speed Ethernet connections up to 40 Gbps and a frequency of 2 GHz. It features S/FTP shielding for reduced interference and a black jacket. One end is fitted with a 90° downwards angled RJ45 plug to allow space-saving routing in tight areas; the other end is a straight RJ45 plug.

Advantages

The Cat.8.1 construction and S/FTP shielding deliver high bandwidth and low crosstalk for 40GBASE-T applications. The angled 90° connector enables installations close to walls, behind appliances or in network cabinets where space is limited. The 10 m length provides flexibility in positioning network equipment while maintaining full RJ45 compatibility.

Suitable for

• 40GBASE-T Ethernet links requiring up to 40 Gbps over short distances
• High-density rack or cabinet installations with limited rear clearance
• Connecting switches, servers, NAS devices or workstations with RJ45 ports

Key specifications

• Standard: Cat.8.1
• Data transfer rate: up to 40 Gbps (40000 Mbit/s)
• Frequency: up to 2 GHz
• Shielding: S/FTP
• Connectors: RJ-45 (one 90° downwards angled, one straight)
• Length: 10 m
• Colour: Black

How to use

Plug the straight RJ45 connector into the network device that provides easier access and insert the 90° downwards angled RJ45 into the port located close to a wall or inside a cabinet to minimise cable bend radius. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and compression points to maintain signal integrity.

Recommendations

For best performance, use this Cat.8.1 cable for short-distance 40GBASE-T links within racks or between nearby network devices. Avoid running the cable parallel to high-voltage power lines and maintain gentle bend radii; do not exceed the intended installation environment or mechanically stress the connectors.