Verkkokaapeli EFB Elektronik K8075.2 RJ-45 Cat5e 2 m keltainen

The EFB Elektronik K8075.2 is a 2 m Cat5e F/UTP patch cable with shielded Hirose TM11 RJ45 plugs. Designed for 10/100/1000Base-T(X) networks, the cable uses 4 x 2 AWG26/7 conductors and a foil shield to reduce electromagnetic interference. The cable is halogen-free, low-smoke and flame-retardant to IEC standards, and comes in a yellow jacket for easy identification.

Advantages

Shielded F/UTP construction provides improved protection against external interference while maintaining Cat5e performance up to 100 MHz. The cable is fitted with IEC 60603-7-3 compliant Hirose TM11 RJ45 plugs and a mounted strain-relief boot for reliable mechanical connection. Safety standards for flame retardancy, halogen-free materials and low smoke emissions reduce risk in enclosed installations.

Suitable for

• Wired Ethernet connections in office and home networks
• Gigabit LAN links (10/100/1000Base-T(X))
• Visible cable routing and identification in racks and patch panels
• Environments requiring reduced electromagnetic interference

Key specifications

• Length: 2 m
• Cable category: Cat5e, 100 MHz
• Conductor: 4 x 2 x AWG26/7
• Shielding: F/UTP (foil shield)
• Connectors: 2 x Hirose TM11 RJ45 shielded, IEC 60603-7-3
• Coding: TIA/EIA 568B
• Standards: Flame retardant IEC 60332-1; Halogen-free IEC 60754-2; Low smoke IEC 61034
• Colour: Yellow
• MPN: K8075.2; EAN: 4049759014087

How to use

Plug each RJ45 connector into the corresponding Ethernet ports on your devices or patch panel following TIA/EIA 568B wiring. Ensure connectors are fully inserted until the strain-relief boot seats against the port to maintain a secure mechanical and electrical connection. Route the cable to avoid sharp bends and sources of strong interference to preserve signal quality.

Recommendations

For best performance, use this Cat5e F/UTP cable for short to medium runs (typical up to 100 m in structured cabling); avoid running parallel and close to high-voltage power lines. Verify that connected equipment supports Gigabit Ethernet for full 1000 Mbps throughput.