Verkkokaapeli Lindy 15 m Cat.6 RJ-45 U/UTP punainen

The Lindy 15m Cat.6 RJ-45 U/UTP Red network cable provides a 15 metre connection for Ethernet devices and supports operating frequencies up to 250 MHz. It is an unshielded U/UTP Cat.6 cable manufactured and tested to ISO/IEC 11801 standards, with RJ-45 connectors on both ends and a red PVC jacket. The cable is suitable for Gigabit Ethernet (10/100/1000Base-T) due to its designed electrophysical parameters and is supplied individually in a polybag.

Advantages

Gold-plated contacts offer corrosion resistance and stable electrical contact over long periods. The snagless connector design with robust strain relief protects the connector latch during installation and removal. Compliance with ISO/IEC 11801 ensures consistent manufacturing and tested performance for Cat.6 applications.

Suitable for

• Wired Gigabit Ethernet (10/100/1000Base-T)
• Home and small office network cabling
• Connecting switches, routers, PCs, NAS and other RJ-45 devices
• Patch panel and patch cord applications

Key specifications

• Cable category: Cat.6 U/UTP
• Length: 15 m
• Operating frequency: up to 250 MHz
• Connectors: RJ-45 to RJ-45, gold-plated contacts
• Colour: Red
• Standards: manufactured and tested to ISO/IEC 11801
• Supported Ethernet: 10/100/1000Base-T(X)

How to use

Connect one RJ-45 connector to your network device (switch, router, computer or patch panel) and the other end to the corresponding RJ-45 port on the second device. Ensure connectors are fully inserted until the latch clicks; the snagless design protects the latch but does not replace correct insertion. Route the cable to avoid tight bends and mechanical strain; use cable management accessories as needed.

Recommendations

For best signal integrity, avoid running the cable parallel to high-voltage power lines and keep bend radius greater than manufacturer recommendations. Store and deploy the cable in environments within typical indoor temperature and humidity ranges; the PVC jacket is intended for indoor use.