Verkkokaapeli Telegärtner Cat.7 MP8 FS 600 LSZH 0,5 m vihreä

The Telegärtner Cat.7 MP8 FS 600 LSZH patch cord, 0.5 m in green, is a shielded networking cable designed for high-speed data transmission in professional environments. It complies with Category 7 (ISO/IEC 11801 edition 2) and supports up to 600 MHz; the cable features moulded 90-degree connectors and a strain-relieved boot for reliable connections and easier routing in confined spaces. The jacket and boot are made from LSZH material to reduce smoke and toxic emissions in case of fire.

Advantages

Shielded construction with 360° plug shielding (for shielded cable types) and S/FTP wiring reduces electromagnetic interference and crosstalk. The cable is flexible and strain relieved with a moulded boot to protect the termination. Termination follows the EIA/TIA 568 wiring sequence, ensuring compatibility with standard network equipment.

Suitable for

• High-speed Ethernet and backbone connections
• Datacenter and server room cabling where reduced emissions are required
• Professional network installations in confined or densely populated patch panels

Key specifications

• Brand: Telegärtner
• Model: Cat.7 MP8 FS 600 LSZH
• Length: 0.5 m
• Color: Green
• Frequency rating: 600 MHz
• Category: Cat.7 (ISO/IEC 11801 edition 2)
• Wiring/Shielding: S/FTP, Cat.7 wiring 1:1
• Termination: EIA/TIA 568
• Cable jacket/boot material: LSZH (Low Smoke, Zero Halogen)
• Connector style: MP8 moulded, 90°
• MPN/EAN: L00000A0193 / 4018359361228

How to use

Plug the moulded MP8 90° connectors into the corresponding RJ45/MP8 ports following standard network device ports or patch-panel ports. Route the cable ensuring the strain relief boot aligns with bends to avoid excessive stress near the connector. Use EIA/TIA 568 wiring-compatible ports to maintain correct pairing and signal integrity.

Recommendations

For best performance, avoid tight cable coils and sharp bends; maintain the cable within its minimum bend radius. Use this Cat.7 S/FTP patch cord where shielded cabling is required and ensure both ends are connected to shielded ports or properly grounded equipment to preserve the shielding effectiveness.