Vesipumppu Einhell GE-SP 18 LL Li (1x4,0Ah)

The Einhell GE-SP 18 LL Li clear water pump (1x4.0Ah) is a battery-powered portable pump from the Power X-Change family designed for moving clear water where no mains supply is available. The pump delivers up to 4,500 l/h, can lift water to a height of up to 8 m (0.8 bar) and has an IPX8 rating for reliable operation in wet conditions. It includes a flexible battery box with integrated cable holder, a long cable for immersion depths up to 4 m and a G1 hose connection on the top of the pump. Delivery includes one 18 V 4.0 Ah PXC battery and a high-speed charger.

Advantages

The cordless design and Power X-Change compatibility provide mobility and flexibility, allowing use with all system batteries. The three-position switch with continuous mode and the high-performance motor enable a maximum delivery rate of 4,500 l/h and suction in shallow water down to 1 mm. Durable, impact-resistant plastic housing and an easily accessible top hose connection support long service life and straightforward installation.

Suitable for

• Draining garden ponds and pools
• Emptying flooded basements or cellars
• Water transfer for irrigation or construction sites
• Temporary water supply in remote locations

Key specifications

• Max. delivery rate: 4,500 l/h
• Max. delivery head: 8 m (0.8 bar)
• Immersion depth (cable): up to 4 m
• Suction level: down to 1 mm
• Battery: 18 V, 4.0 Ah PXC (included)
• Protection class: IPX8
• Hose connection: G1 thread, top-mounted

How to use

Install a charged 18 V PXC battery in the flexible battery box and secure the cable in the integrated holder. Attach a suitable hose to the G1 connection on top of the pump. Lower the pump into clear water with a maximum immersion depth of 4 m and select the required setting on the three-position switch or continuous mode for uninterrupted operation. After use, remove the battery and store the pump and accessories in a dry place.

Recommendations

Use the pump only with clear, particulate-free water to avoid damage. Do not operate the pump without a battery or outside the specified immersion depth. For prolonged service life, clean the hose connection and pump housing after each use and store the battery separately at recommended charge levels.