Victron Energy VE.Can–CAN-väylä BMS -kaapeli, tyyppi A, 5 m (ASS030710150)

Connection cable to connect a CAN-bus-capable battery to a Victron GX device.

• Battery integration in Victron system
• Simple configuration

This VE.Can to CAN-bus BMS cable from Victron is needed to connect a CAN-bus-capable battery that is not from Victron to a Victron GX device. The cable, with a length of 5m, corresponds to Type A, which can be used for the following batteries:

• BYD B-Box
• Pylontech US2000C / US3000C / UP5000 / Force-L
• Installation

The side labelled "CAN-Bus BMS" is plugged into the battery. The other side labelled "VE.Can" must be connected either to the VE.Can port of the GX device or to the BMS-Can port. Both port types of a GX device can be configured for use with a third-party CAN-bus battery connected to a BMS. For configuration information, refer to the manual for the battery you are using.

• 1x Victron VE.Can to CAN-Bus BMS Type A cable 5m