Virtajohto helos 262775 CEE 7/7 - IEC 60320 C15 250V 10A 5m

helos power cable model 262775 connects a CEE 7/7 mains plug (angled, male, 90°) to an IEC 60320 C15 appliance connector (straight). The cable is 5 metres long, rated for 250 V and 10 A, and uses H05VV-F construction with three conductors of 1.0 mm² cross-section. It is black and marked with VDE and RoHS2 compliance.

Advantages

The helos power cable offers a 5 m reach for flexible placement of equipment, a right-angled CEE 7/7 plug to reduce strain at wall sockets, and a straight IEC 60320 C15 connector for appliances with C15 inlets. The H05VV-F 3 x 1 mm² conductor assembly provides the electrical rating of 250 V and 10 A required for suitable devices. VDE and RoHS2 markings indicate compliance with common safety and environmental standards.

Suitable for

• IT equipment with IEC C15 inlet
• Laboratory and test appliances requiring 250 V / 10 A connection
• Professional electronics and small server appliances
• Situations where a 5 m extension from mains is needed

Key specifications

• Brand: helos
• Model / MPN: 262775
• EAN: 4005938627752
• Cable type: H05VV-F, 3 x 1.0 mm²
• Length: 5 m
• Input plug: CEE 7/7, male, 90° angled
• Output connector: IEC 60320 C15, straight
• Rated voltage: 250 V
• Rated current: 10 A
• Colour: Black
• Approvals/marking: VDE, RoHS2

How to use

Connect the angled CEE 7/7 plug to a compatible mains socket and the IEC 60320 C15 connector to the appliance inlet. Ensure the appliance is compatible with a C15 inlet and that its rated voltage and current do not exceed 250 V / 10 A. Route the 5 m cable to avoid sharp bends, heat sources and mechanical strain; keep connectors dry and free of dust.

Recommendations

Do not use this cable for devices that require higher current than 10 A or operate above 250 V. Inspect the cable and connectors periodically for damage; replace if insulation or contacts are compromised. Use only with appliances that accept an IEC 60320 C15 connector.