Virtajohto helos 262777 kulmapistoke CEE 7/7 - IEC 60320 C19 250V 10A 3m

Helos power cable model 262777 is a 3 m mains lead with an angled CEE 7/7 plug and a straight IEC 60320 C19 connector. Rated for 250 V and 10 A, this black H05VV-F 3G 0.75 mm² cable is intended for connecting higher-current equipment such as servers, UPS units and professional power distribution devices, while the 90° angled mains plug helps save space at wall outlets.

Advantages

The cable combines a space-saving CEE 7/7 plug angled at 90° with a secure IEC 60320 C19 connector, providing reliable electrical contact for equipment requiring up to 10 A at 250 V. Constructed with H05VV-F 3G 0.75 mm² conductor and VDE/IEC 60320 compliant markings, it is suitable for standard IT and power distribution installations. The 3 m length offers flexibility in rack or room layouts without introducing additional adapters.

Suitable for

• Connecting servers and rack equipment to mains outlets
• Powering UPS units and PDUs with IEC C19 inlets
• Use in server rooms, data centres and professional AV setups

Key specifications

• Manufacturer: Helos (Herweck article 262777)
• Length: 3 m
• Cable type: H05VV-F 3G 0.75 mm²
• Plug (mains): CEE 7/7, angled 90°
• Connector (device): IEC 60320 C19, straight
• Rated voltage: 250 V
• Rated current: 10 A
• Color: Black
• Approvals/markings: VDE, RoHS2, IEC 60320
• EAN: 4005938627776

How to use

Insert the angled CEE 7/7 plug into a compatible wall outlet or power strip, then connect the IEC 60320 C19 connector to the device inlet. Ensure both ends are fully seated and that the cable is routed to avoid sharp bends or crushing. Before use, verify the device’s inlet type and that the required voltage and current ratings (250 V, 10 A) match the connected equipment.

Recommendations

For reliable operation, avoid routing the cable near heat sources or heavy foot traffic and periodically inspect for damage. Do not exceed the rated 10 A current and replace the cable if insulation or conductors are compromised.