Virtakaapeli PSSO PowerCON 3,0 m H07RN-F 3G1,5 verkkovirran liitäntään

PSSO PowerCON 3.0 m power cable with H07RN-F rubber sheathing and 3G1.5 conductors is designed for mains connection of audio, lighting and stage equipment that use PowerCON-type connectors. The 3.0 m length offers a balance between reach and tidy cable management in mobile and temporary installations, while the H07RN-F jacket provides flexibility and increased resistance to abrasion and moisture compared with standard PVC-sheathed cables. Conductors sized at 1.5 mm² support stable power delivery for devices within the typical current range for small to medium event setups.

Advantages

The rubber-insulated H07RN-F outer sheath ensures enhanced flexibility in cold conditions and improved mechanical durability during frequent handling and routing. The cable’s 3G1.5 conductor configuration provides a full earth/ground conductor and consistent cross-section for predictable voltage drop and safe operation at rated currents for compatible equipment. The PowerCON-compatible connector arrangement enables secure, lockable mains connections that reduce accidental disconnection in busy environments.

Suitable for

Key specifications

How to use

Connect the PowerCON plug to compatible equipment and the mating socket on the mains distribution or device, ensuring the connector locks securely. Route the cable to avoid sharp edges, pinch points and high-traffic walkways to reduce wear on the H07RN-F sheath. Inspect the cable visually before each use for cuts, exposed conductors or damage to the connector; do not use the cable if any damage is found. When storing, coil the cable without tight bends to preserve the rubber jacket and conductor integrity.

Recommendations

Use this PSSO PowerCON cable in installations where a lockable mains connection and flexible, weather-resistant sheathing are required. Avoid permanent underground burial and continuous exposure to oils or chemicals not compatible with H07RN-F rubber. For higher current demands, consider cables with larger conductor cross-sections and verify compatibility with the connected equipment’s rated current and connector type.