Virtakaapeli ShiverPeaks BS09-06001 1,5 m CEE7/16 C7 liitin

The ShiverPeaks BS09-06001 power cable is a 1.5 m mains lead designed to connect devices with a figure-8 (C7) inlet to power outlets fitted with a CEE7/16 (Europlug) plug. Rated for 250 V input, this cable provides a straightforward, detachable connection for a variety of low-to-moderate power consumer electronics. The cable’s construction emphasizes reliable contact and compatibility with devices that use the C7 coupler standard.

Advantages

This 1.5 m ShiverPeaks cable offers a balance of length and flexibility suitable for typical home and office setups without excess slack. The Europlug (CEE7/16) end is compatible with standard continental European sockets, while the C7 coupler fits common audio-visual and small appliance inlets. Constructed for consistent electrical contact and everyday handling, the cable supports safe power delivery at up to 250 V.

Suitable for

• Portable audio equipment such as small amplifiers and radios
• DVD/Blu-ray players and set-top boxes
• Small household electronics with a figure-8 (C7) inlet
• Home office devices like some laptop power bricks and chargers with a detachable lead

Key specifications

• Length: 1.5 metres
• Input voltage rating: 250 V
• Connector A: CEE7/16 (Europlug)
• Connector B: C7 (figure-8) coupler
• Application: mains lead for low-to-moderate power consumer electronics

How to use

Insert the CEE7/16 plug into a compatible mains outlet and connect the C7 coupler to the device’s figure-8 inlet until it seats firmly. Ensure the cable is routed to avoid pinching, tripping hazards, or contact with heat sources. Before use, inspect the cable and connectors for visible damage; do not use if the insulation is cut or connectors are loose. Disconnect by pulling the plug or coupler body, not by tugging the cable itself.

Recommendations

Use the cable indoors and in dry environments only. Match the device’s power requirements to the cable’s 250 V rating and avoid using this lead with high-current appliances that require grounded or IEC C13-style connectors.