Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

Virtakaapelisarja 1 m 35 mm² IVT SWD -sarjan inverttereille 2000 W

Virtakaapelisarja 1 m 35 mm² IVT SWD -sarjan inverttereille 2000 W
Virtakaapelisarja 1 m 35 mm² IVT SWD -sarjan inverttereille 2000 W
64,52 €
Power cable set 1 m 35 mm² for IVT SWD series inverter 2000 W is a dedicated connection cable intended for use with IVT SWD 2000 W inverters. The set contains one meter of 35 mm² cross-section power cable designed for DC and AC connections between batteries, inverters and distribution components. Th... Lue lisää
Varasto 9 Tuotekoodi 2245256 Merkki IVT Malli 431004 Takuu 2 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika Keskiviikko, Lokakuu 28
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardPayPalApple PayGoogle PayTilisiirto

Power cable set 1 m 35 mm² for IVT SWD series inverter 2000 W is a dedicated connection cable intended for use with IVT SWD 2000 W inverters. The set contains one meter of 35 mm² cross-section power cable designed for DC and AC connections between batteries, inverters and distribution components. The cable is sized to carry the currents typical for small off-grid systems and backup power installations and is suitable for short-distance installations where solid, low-resistance connections are required.

Advantages

The 35 mm² conductor cross-section provides low voltage drop and reliable current capacity for the rated inverter power. The one-meter length allows flexible placement of the inverter relative to batteries or distribution blocks without excess cable clutter. The cable construction is suitable for standard inverter terminals and ensures stable mechanical and electrical contact when properly terminated. Using a correctly sized cable reduces heating and energy losses compared with undersized wiring.

Suitable for

Key specifications

How to use

Strip the cable ends to the required length and apply appropriate lugs or ring terminals compatible with the inverter and battery terminals. Ensure terminals are clean and free of corrosion before assembling. Mount the cable so it follows the shortest practical route with secure fastening to avoid movement or chafing. Tighten terminal connections to the torque recommended by the inverter manufacturer and verify polarity before energizing the system. After installation, inspect connections for heat buildup during initial operation.

Recommendations

Use the cable only for the intended inverter and battery connections. Verify conductor size and length against the installation’s current requirements and local electrical regulations. If longer runs or different environmental conditions are required, select cables and terminations rated for those conditions and consult a qualified installer when in doubt.

Tärkeimmät ominaisuudet
  • DC connection between battery bank and IVT SWD series 2000 W inverter
  • AC output wiring to nearby distribution or fused shunts in small systems
  • Backup power setups and portable inverter installations
  • Short interconnect runs where 35 mm² conductor is required for current capacity
  • Conductor cross-section: 35 mm²
  • Length: 1 m
  • Intended use: power cable for inverter DC/AC connections
  • Compatible with IVT SWD series 2000 W inverter terminals
  • Designed for low voltage drop and high current capacity in short runs
Tekniset tiedot
Kaapelin pituus
1 m
Tuotteen väri
White
Hintahistoria viimeisen 6 kuukauden ajalta
Virtakaapelisarja 1 m 35 mm² IVT SWD -sarjan inverttereille 2000 W
Nykyinen
64,52 €
Alin
63,77 €
Ylin
64,66 €
Muutos 24 h
+0,75 €   +1%
Viikko
-0,13 €   0%
Kuukausi
+0,05 €   +0%

Suositut tuotteet tässä kategoriassa

Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.