Virtalähde DeLOCK 80473 C14 C7 2,5A 90° musta

The DeLOCK Power Adapter C14 to C7 is designed to connect devices with a C7 (figure-8) inlet to a standard C14 mains outlet. It supports up to 2.5 A and features a 90° angled C7 plug to reduce cable strain and improve space management behind equipment. The black finish blends with most electronics and power setups, providing a discreet connection solution for home, office, and professional AV environments.

Advantages

The angled 90° C7 connector minimizes the required clearance behind devices and helps prevent accidental unplugging or connector stress. With a rated current of 2.5 A, the adapter is suitable for low- to moderate-power appliances that use a C7 inlet. The simple two-conductor design ensures reliable mains connection without additional adaptors or modifications to existing cables. The black housing is practical for installations where a low-visibility appearance is preferred.

Suitable for

• Small electronics with a C7 (figure-8) power inlet
• Laptops and portable chargers that accept a C7 connector
• Monitors, audio equipment and game consoles with C7 sockets
• Tight spaces behind furniture or racks where a straight plug would not fit

Key specifications

• Connector A: IEC 60320 C14 (inlet side)
• Connector B: C7 (figure-8) angled 90°
• Maximum current rating: 2.5 A
• Configuration: two-conductor, non-polarized
• Color: black
• Typical use: mains power adapter for C7-equipped devices

How to use

Insert the C14 end into a compatible mains outlet or power distribution unit. Align the 90° C7 plug with the device's C7 inlet and push gently until fully seated. Ensure the cable routing does not place excessive mechanical stress on the connector or device inlet. Disconnect by pulling the plug body, not the cable, to avoid damaging the conductor connection. Use the adapter only with devices whose input current does not exceed the rated 2.5 A.

Recommendations

Verify device power requirements before use and avoid using the adapter with high-current appliances. Inspect connectors periodically for wear or damage, and replace the adapter if the housing, contacts, or insulation show signs of degradation. Keep the adapter away from water, heat sources, and sharp edges to maintain safe operation.