Virtalähde ENERMAX ERV1000G-AHG-MAC, 1000 W, 20+4-Pin-ATX, täysmodulaarinen, 80 PLUS Gold, musta

REVOLUTION III 1000W is an 80 PLUS® Gold certified, fully modular ATX 3.1 ready power supply delivering up to 93% efficiency under standard load. It uses industrial-grade 100% Japanese capacitors and a 120 mm fluid dynamic bearing (FDB) fan to provide stable power delivery and quiet cooling. The unit is certified for continuous operation at temperatures up to 40°C and at altitudes up to 5000 meters. Premium individually mesh-sleeved cables with cable combs and side-inclined modular sockets simplify cable routing and create a tidy build.

Advantages

High efficiency reduces wasted energy and heat thanks to the 80 PLUS® Gold certification and ATX 3.1 compatibility for modern, power-hungry graphics cards. The use of 100% industrial-grade Japanese capacitors ensures long-term voltage stability and reliability. The FDB fan combines effective cooling with low noise. Design elements such as mesh-sleeved cables with a 21-piece cable comb kit and inclined modular sockets improve cable management and overall system appearance. The capability to operate continuously at high altitude and elevated ambient temperatures expands deployment options.

Key specifications

• Power output: 1000 W
• Input voltage/frequency: 100 - 240 V, 50/60 Hz
• Efficiency certification: 80 PLUS® Gold (up to 93% typical)
• ATX standard: Intel ATX 3.1 ready
• Capacitors: 100% industrial-grade Japanese capacitors
• Fan: 120 mm Fluid Dynamic Bearing (FDB) fan
• Modularity: Fully modular cables
• Cabling: Premium individually mesh-sleeved cables with 21-piece cable comb kit
• Included cable: One 600W native 12V-2x6 cable
• Motherboard connector: 20+4 pin ATX
• Operating conditions: Continuous operation up to 40°C and up to 5000 m altitude
• Form factor/compatibility: PC ATX
• Color: Black
• Fan size: 12 cm

How to use

Install the REVOLUTION III 1000W into a compatible PC case using standard ATX mounting points and connect the 20+4 pin motherboard connector first. Use the modular cables to connect CPU, GPU and storage devices as required, routing mesh-sleeved cables through the case and securing them with the supplied cable combs for tidy management. Ensure the power supply is set to the correct mains voltage if a manual selector is present (most modern units auto-switch). Allow adequate airflow around the 120 mm FDB fan and avoid obstructing vents. Operate the unit within the specified ambient temperature (up to 40°C) and altitude (up to 5000 m) limits.

Recommendations

For best results, pair the REVOLUTION III 1000W with an ATX 3.1-compliant motherboard and modern graphics cards that can leverage the higher current delivery. Regularly inspect and clean dust from the fan and vents, and organize cables with the included combs to maintain optimal airflow and cooling performance.