Virtalähde Televes MS-NT182 NEVO 18V 2000mA verkkosovitin NEVO-laitteille

The Televes MS-NT182 NEVO power supply provides a stable 18V DC output at 2000mA designed specifically for NEVO-compatible equipment. This AC/DC adapter is intended to replace faulty adapters or to supply power to receivers, control units and modules that require an 18V/2A input. Its construction and regulated output maintain consistent voltage under typical load conditions to help ensure reliable operation of connected Televes devices.

Advantages

The adapter offers a regulated 18V DC output with a 2A current capacity suitable for a range of NEVO devices. Its compact form factor and standard connector allow straightforward installation in equipment racks or near wall-mounted electronics. Built-in protection against common power irregularities helps reduce risk of damage to sensitive electronics while maintaining stable performance during normal use.

Suitable for

• Televes NEVO receivers and control modules that require 18V DC, 2000mA input
• Replacement of worn or damaged power adapters in installations using NEVO equipment
• Powering small control units or modules in home or commercial AV installations

Key specifications

• Output voltage: 18V DC
• Output current: 2000 mA (2 A)
• Power type: AC/DC external adapter
• Intended use: dedicated power supply for NEVO-compatible devices
• Physical: compact external adapter suitable for mounting near equipment

How to use

Confirm that the target device requires an 18V DC input and that its current draw does not exceed 2A. Disconnect mains power before connecting the adapter. Insert the adapter plug into the device’s power socket and connect the adapter to mains power. After connection, verify the device powers on and functions as expected. If the device shows signs of improper operation or overheating, disconnect the adapter immediately and inspect the device and adapter for compatibility or faults.

Recommendations

Use the adapter only with devices specified for 18V/2A power. Avoid using the adapter in damp or unventilated environments and keep the adapter and cable clear of heat sources. For permanent installations, ensure adequate strain relief for the connector and confirm cable routing to prevent accidental disconnection. If in doubt about compatibility, consult product documentation or technical support for the NEVO device.