Vivolink PROUSBCBMM12.5 USB-kaapeli USB 3.2 Gen 1 (3.1 Gen 1) 12,5 m USB C USB B musta

The Vivolink PROUSBCBMM12.5 is a 12.5 m USB data cable that connects a USB‑C host (such as a laptop) to a USB‑B device (such as a camera or audio interface). It supports USB 3.2 Gen 1 (also referred to as USB 3.1 Gen 1) for data rates up to 5 Gbit/s and is designed for use in meeting rooms and professional setups where longer cable runs are required. The cable has a black outer finish and a lightweight construction for easier routing and installation.

Advantages

This cable provides a direct USB‑C to USB‑B connection without additional adapters, enabling high‑speed data transfer at up to 5 Gbit/s over a 12.5 m run. It is compatible with both USB 3.0 and USB 2.0 device modes, ensuring backward compatibility with older equipment. The extended length allows flexible placement of cameras, audio devices or peripherals in meeting rooms while maintaining reliable connectivity.

Suitable for

• Connecting a USB‑C laptop to a USB‑B camera
• Linking USB‑C notebooks to USB‑B audio interfaces or mixers
• Meeting room AV setups requiring longer cable runs
• Replacing short USB cables when only USB‑C ports are available on the host

Key specifications

• Connector 1: USB C
• Connector 2: USB B
• USB version: USB 3.2 Gen 1 (3.1 Gen 1) — up to 5 Gbit/s
• Cable length: 12.5 m
• Colour: Black
• MPN: PROUSBCBMM12.5
• EAN: 5704174849933

How to use

Connect the USB‑C end to the laptop or host device and the USB‑B end to the peripheral device. Ensure both devices are powered on and that the host recognizes the connected device; install any required drivers on the host if prompted. For optimal performance, use USB 3.2/3.0 ports on the host and the device when available. Route the cable to avoid sharp bends and secure it to prevent strain on connector ends.

Recommendations

Use this Vivolink USB‑C to USB‑B cable for reliable high‑speed data connections in meeting rooms and professional AV environments; avoid running the cable near strong electromagnetic sources and do not exceed recommended bend radius to preserve signal integrity.