XFP-lähetin-vastaanotinmoduuli BlueOptics 1442910G1-BO 10000 Mbit/s

The BlueOptics 1442910G1-BO XFP transceiver module is designed for 10 Gbit/s fiber optic links in network equipment that supports the XFP interface. The module supports a maximum data transfer rate of 10000 Mbit/s and is supplied in a silver housing. It is engineered for continuous operation with a rated mean time between failures (MTBF) of 1,000,000 hours and complies with CE, FCC and RoHS standards.

Advantages

This XFP module provides a standard XFP interface for straightforward compatibility with a wide range of switches and routers that accept hot-pluggable transceivers. The 10 Gbit/s data rate supports high-bandwidth applications while the compact, silver form factor facilitates installation in dense equipment racks. Compliance with international safety and environmental standards reduces regulatory concerns in professional deployments.

Suitable for

• 10 Gbit/s fiber uplinks between switches or routers
• High-bandwidth server connections in data centers
• Metro and carrier-class optical links where XFP modules are supported
• Replacement or spare transceiver inventory for network maintenance

Key specifications

• Interface type: XFP
• Maximum data transfer rate: 10000 Mbit/s
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Install the transceiver into an XFP-compatible port on the network device while the device is powered down or following the equipment vendor's hot-swap procedure. Connect the appropriate fiber patch cable to the module's optical interface, ensuring correct connector type and polarity. Verify link status and speed via the host device management interface and monitor for proper signal levels and error statistics.

Recommendations

Handle the optical interfaces with care to avoid contamination; use dust caps when the module is not connected. Match fiber type and connector standard to the transceiver specifications and follow the network equipment vendor’s guidance for hot-plugging and firmware compatibility.