XFP-lähetin-vastaanotinmoduuli BlueOptics XFP-LX-SM1310-BO 10000 Mbit/s 1310 nm

The BlueOptics XFP-LX-SM1310-BO is an XFP transceiver module for single-mode fiber links, supporting a maximum data transfer rate of 10000 Mbit/s. Operating at a wavelength of 1310 nm, the module is housed in a metal enclosure that contributes to mechanical durability and electromagnetic shielding. It is specified for long-reach applications up to 10000 m and is powered from a 3.3 V input, making it compatible with common networking equipment that accepts XFP interface modules.

Advantages

This transceiver offers high-speed 10 Gbps transmission over single-mode fiber with a 1310 nm wavelength, suitable for long-distance links up to 10 km. The metal housing provides robust protection and improved thermal dissipation while the compact, lightweight design minimizes added load on network devices. Low input voltage requirements (3.3 V) ensure compatibility with standard XFP slots and reduce power supply constraints in dense network installations.

Suitable for

Key specifications

How to use

Install the BlueOptics XFP-LX-SM1310-BO into an XFP-compatible port on your switch, router or media converter while the device is powered off or following the manufacturer's hot-plug guidelines. Connect a single-mode fiber cable with appropriate LC/other connector type to the XFP optical interface using compatible adapters or patch panels if necessary. Ensure the remote transceiver on the far end matches the 1310 nm wavelength and supports 10 Gbit/s operation. After installation, verify link status and optical signal levels via the host equipment management interface or monitoring tools.

Recommendations

For reliable long-distance performance, use single-mode fiber of appropriate attenuation characteristics, keep optical connectors clean and dust-free, and verify that transceivers at both ends are compatible in wavelength and data rate. Observe ESD precautions when handling the module and follow the host equipment manufacturer's installation guidelines to maintain warranty and operational stability.