XLR-kaapeli PSSO 3-napainen 20 m musta Neutrik-liittimillä

The PSSO 3-pin XLR cable, 20 m in length and finished in black, is a balanced audio cable fitted with Neutrik connectors. It is intended for professional audio signal transmission between microphones, mixing consoles and stage or studio equipment. The cable's construction focuses on shielding and conductor quality to minimise interference and preserve signal integrity across long runs.

Advantages

The cable combines a balanced 3-pin wiring topology with high-quality Neutrik connectors to ensure secure mechanical contacts and low contact resistance. A robust outer jacket and strain relief at connector ends reduce wear from handling and movement during live events. Shielding and conductor design help suppress electromagnetic interference and handling noise, maintaining consistent audio performance over the full 20-meter length.

Suitable for

Key specifications

How to use

Connect the female XLR end to the microphone or the output device and the male XLR end to the mixer, preamplifier or input stage of the target device, ensuring secure seating of the Neutrik connectors until the latch clicks. Route the cable to avoid sharp bends and pinches; secure with cable ties or gaffer tape where appropriate to prevent tripping hazards and mechanical stress. For multiple runs, keep audio cables separated from power cables to reduce potential hum or interference.

Recommendations

Inspect connectors periodically and keep contact surfaces clean and dry. When coiling the cable for storage, use loose coils or the over-under method to reduce twisting and prolong life. Avoid kinking the cable and protect connectors with covers when not in use.