XSPC Rotary 14mm Offset G1/4 liitin, kromi musta - kulma pyörivä liitin nestejäähdytykseen

The XSPC Rotary 14mm Offset G1/4 Fitting in chrome black is an angled rotary connector designed for PC water cooling systems. It provides a 14 mm offset and a rotating joint that helps relieve stress on tubes and hoses while enabling precise angled routing in tight or constrained layouts. The fitting is compatible with standard G1/4 threaded ports and intended for use in custom liquid cooling loops where space management and flexible tube orientation are required.

Advantages

This rotary offset fitting reduces torsion and bending stress on soft tubing by allowing rotation at the connection point. The 14 mm offset creates clearance between components, enabling neater tube runs and improved compatibility with radiators, pumps, and reservoirs mounted at non-aligned angles. The chrome black finish provides corrosion resistance and a neutral aesthetic suitable for many system styles. The threaded G1/4 interface ensures broad compatibility with common water-cooling blocks and accessories.

Suitable for

• Custom PC water-cooling loops requiring angled connections
• Applications where tubing needs strain relief or rotational movement
• Builds with limited clearance between components
• Systems using standard G1/4 threaded ports

Key specifications

• Thread type: G1/4 compatible threaded connector
• Offset distance: 14 mm
• Connection style: angled rotary joint
• Finish: chrome black
• Material: metal construction suitable for liquid cooling (metal alloy/plated finish)

How to use

Install the fitting by screwing it into a compatible G1/4 threaded port on a water block, radiator, pump, or reservoir. Hand-start the threads to avoid cross-threading, then tighten to a secure fit using appropriate tools while avoiding over-torquing. Rotate the fitting to the desired tube orientation to relieve hose strain before final tightening. Use thread sealant or tape if recommended for your loop components, and ensure all connections are leak-tested before running the system under normal conditions.

Recommendations

Use the rotary offset fitting with soft or semi-rigid tubing to maximize its strain-relief benefit. Verify compatibility with your loop’s materials and perform a full leak test after installation. For long-term reliability, periodically inspect fittings and tubing for signs of wear, loosening, or corrosion, and re-tighten or replace components as necessary.