Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

ACT AK4082 DisplayPort-kaapeli 2 m musta

ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
60 kkilmaiseksiilmainen
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
ACT AK4082 DisplayPort-kaapeli 2 m musta
24,81 €
PDF
PDF
Varasto 10 Tuotekoodi 2411352 Malli AK4082 Takuu 5 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika tiistai 1. joulukuuta
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardApple PayGoogle PayTilisiirto

Esitä kysymys – AI-avustaja vastaa heti.

Kuvaus

The ACT AK4082 DisplayPort cable is a DisplayPort 2.1 DP80 UHBR20 cable designed for high-bandwidth video and audio transmission. With a 2 m length and lockable snap-in DisplayPort connectors on both ends, the cable supports resolutions up to 10K@30Hz, 8K@60Hz and 4K@240Hz and a maximum bandwidth of 80 Gbps. It is suitable for demanding professional and consumer setups that require reliable, high-resolution display connectivity.

Advantages

The cable provides UHBR20 DP80 performance with 80 Gbps bandwidth and support for Display Stream Compression (DSC 1.2a), HDR, HDCP 2.2 and multi-channel audio formats. Full copper conductors and gold-plated contacts ensure stable signal transmission, while the snap-in locking connector reduces the risk of accidental disconnection. The 2 m length offers flexible placement between source and display.

Suitable for

When it may not be suitable

This cable may be unnecessary for basic office displays or legacy systems that do not support DisplayPort 2.1 bandwidth or advanced features such as DSC or HDR. If your devices only require standard Full HD or lower resolutions, a lower-specification cable will provide comparable performance at lower cost.

Key specifications

How to use

Connect one DisplayPort male connector to the source device (PC, GPU, media player) and the other to the DisplayPort input of the monitor, projector or AV receiver. Ensure both devices support the desired resolution and refresh rate; enable DSC or HDR in device settings if required. The snap-in latch secures the connection; press the latch release tab to unplug the cable.

What to consider before purchase

Recommendations

For best results, use the ACT AK4082 with DisplayPort 2.1-capable graphics cards and monitors and keep firmware/drivers up to date. When targeting the highest refresh rates or resolutions, verify display and GPU settings and enable DSC or HDR as supported.
Tärkeimmät ominaisuudet
  • High-resolution medical imaging and diagnostic displays
  • Lecture halls and auditoriums for educational presentations
  • Corporate meeting rooms and conference centers for video conferencing and presentations
  • Home theaters, gaming setups, graphic design and video editing workstations
  • DisplayPort version: 2.1
  • Maximum bandwidth: 80 Gbps (UHBR20 / DP80)
  • Maximum resolutions and refresh rates: 10K@30Hz, 8K@60Hz, 4K@240Hz
  • Supported features: DSC 1.2a, HDR, HDCP 2.2, FEC, MST, EDID, up to 32-channel audio including Dolby TrueHD and DTS-HD Master Audio
  • Connectors: DisplayPort male – DisplayPort male with snap-in lock
  • Cable conductor material: full copper; contacts: gold-plated
  • Length: 2 m
  • Colour: Black
  • Confirm that both source and display support DisplayPort 2.1 features (bandwidth, DSC, HDR) to use the highest resolutions and refresh rates
  • Check whether 2 m cable length is suitable for your setup or if a longer/shorter cable is needed
  • Ensure your devices support HDCP 2.2 and the specific audio or multi-stream features you require

Tekniset tiedot

Tekniset tiedot
AWG-johdinkoko
30
DisplayPort-versio
2.1
HDCP
Kyllä
Kaapelin pituus
2 m
Kaapelin suojaus
Alumiinimylarfolio
Kaapelin tyyppi
Pyöreä kaapeli
Liitin 1
DisplayPort
Liitin 1 lukittava
Kyllä
Liitin 2
DisplayPort
Liitin 2 lukittava
Kyllä
Liittimen 1 muoto
Suora
Liittimen 1 uros/naaras
Uros
Liittimen 2 muoto
Suora
Liittimen 2 uros/naaras
Uros
Liittimen kontaktien pinnoitus
Kulta
Magneettisesti suojattu
Kyllä
Plug and Play
Kyllä
Suurin resoluutio
7680 x 4320 pikseliä
Suurin virkistystaajuus
240 Hz
Tiedonsiirtonopeus
80 Gbit/s
Tuotteen väri
Musta
Vaipan materiaali
Polyvinyylikloridi (PVC)
Väriskannaus
4:4:4
Hintahistoria viimeisen 6 kuukauden ajalta
ACT AK4082 DisplayPort-kaapeli 2 m musta
Nykyinen
24,81 €
Alin 7 pv
24,50 €
Ylin 7 pv
24,81 €
Muutos 24 h
0,00 €   0%
Muutos 7 pv
+0,31 €   +1%
Muutos 30 pv
-19,00 €   -43%

Kirjoita arvostelu

Arvosana *
Nimesi näytetään julkisesti – voit käyttää nimimerkkiä. Kutsumme ostajia kirjoittamaan arvosteluja; tarkistamme arvostelut ennen julkaisua ja julkaisemme myös kriittiset.

Lisää ACT-tuotteita tässä kategoriassa

12

Suositut tuotteet tässä kategoriassa

8
Myyjä: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Liettua · Yritystunnus 303192950 · ALV-numero LT100008198612 · Toimitus EU:sta (Liettua)
WhatsApp
Messenger
Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.
Kaikki kategoriat