Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

ACT AK4083 DisplayPort-kaapeli 3 m musta

ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
60 kkilmaiseksiilmainen
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
ACT AK4083 DisplayPort-kaapeli 3 m musta
29,86 €
PDF
PDF
Varasto 10 Tuotekoodi 2411353 Malli AK4083 Takuu 5 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika tiistai 1. joulukuuta
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardApple PayGoogle PayTilisiirto

Esitä kysymys – AI-avustaja vastaa heti.

Kuvaus

The ACT AK4083 DisplayPort cable is a 3 m black DisplayPort 2.1 cable (DP80 UHBR20) designed for high-bandwidth video and audio connections. The cable supports up to 80 Gbps bandwidth and delivers resolutions up to 10K@30Hz, 8K@60Hz and 4K@240Hz. It includes a snap-in locking connector for a secure physical connection and supports HDR, HDCP 2.2, DSC 1.2a and multi-channel audio formats.

Advantages

The cable provides a high maximum bandwidth of 80 Gbps and UHBR20 performance for demanding video applications, enabling high resolutions and high refresh rates. Support for Display Stream Compression (DSC 1.2a), HDR and HDCP 2.2 ensures compatibility with modern displays and protected content. Gold-plated contacts and full copper conductors ensure reliable signal transmission, while the snap-in lock reduces the risk of accidental disconnection.

Suitable for

When it may not be suitable

This cable may be unnecessary for basic office tasks or older systems that do not support DisplayPort 2.1 features or require only low resolutions and refresh rates. Systems limited to earlier DisplayPort versions or with lower bandwidth needs will not benefit from the full capabilities of this cable.

Key specifications

How to use

Connect one DisplayPort male connector to the DisplayPort output of your source device (PC, graphics card or media player) and connect the other DisplayPort male connector to the DisplayPort input of your monitor, projector or AV receiver. Ensure both devices support the desired resolution and refresh rate and enable any required settings such as DSC, HDR or the appropriate output mode in the source device's display settings. Push the connector until the snap-in mechanism engages to secure the connection.

What to consider before purchase

Recommendations

For best results use the cable with devices that explicitly support DisplayPort 2.1 and UHBR20. Configure source and display settings to match the target resolution and refresh rate, enable DSC if needed, and ensure firmware and drivers are up to date to achieve stable 8K/10K output and HDR performance.
Tärkeimmät ominaisuudet
  • High-resolution medical imaging displays and diagnostic workstations
  • Lecture halls, auditoriums and educational presentation systems
  • Corporate meeting rooms, video conferencing and presentation systems
  • Home theaters, gaming rigs, graphic design and video editing setups
  • DisplayPort version: 2.1 (DP80 UHBR20)
  • Maximum bandwidth: 80 Gbps
  • Maximum resolutions and refresh rates: 10K@30Hz, 8K@60Hz, 4K@240Hz
  • Video features: HDR support, Display Stream Compression (DSC 1.2a), Forward Error Correction (FEC), Multi-Stream Transport (MST)
  • Content protection: HDCP 2.2 support
  • Audio: multi-channel audio support including Dolby TrueHD and DTS-HD Master Audio
  • Connectors: DisplayPort male to DisplayPort male, snap-in locking connector
  • Conductors and contacts: full copper conductors, gold-plated contacts
  • Cable length: 3 m
  • Colour: black
  • Whether your source device and display support DisplayPort 2.1 features (resolution, refresh rate and DSC)
  • If your workflow requires HDR, HDCP 2.2 or multi-channel audio support
  • Required cable length and routing for your setup (this model is 3 m)
  • Compatibility with existing connectors and mounting constraints (DisplayPort male to male)

Tekniset tiedot

Tekniset tiedot
AWG-johdinkoko
30
DisplayPort-versio
2.1
HDCP
Kyllä
Kaapelin pituus
3 m
Kaapelin suojaus
Alumiinimylarfolio
Kaapelin tyyppi
Pyöreä kaapeli
Liitin 1
DisplayPort
Liitin 1 lukittava
Kyllä
Liitin 2
DisplayPort
Liitin 2 lukittava
Kyllä
Liittimen 1 muoto
Suora
Liittimen 1 uros/naaras
Uros
Liittimen 2 muoto
Suora
Liittimen 2 uros/naaras
Uros
Liittimen kontaktien pinnoitus
Kulta
Magneettisesti suojattu
Kyllä
Plug and Play
Kyllä
Suurin resoluutio
7680 x 4320 pikseliä
Suurin virkistystaajuus
240 Hz
Tiedonsiirtonopeus
80 Gbit/s
Tuotteen väri
Musta
Vaipan materiaali
Polyvinyylikloridi (PVC)
Väriskannaus
4:4:4
Hintahistoria viimeisen 6 kuukauden ajalta
ACT AK4083 DisplayPort-kaapeli 3 m musta
Nykyinen
29,86 €
Alin 7 pv
29,49 €
Ylin 7 pv
29,86 €
Muutos 24 h
0,00 €   0%
Muutos 7 pv
+0,38 €   +1%
Muutos 30 pv
-19,07 €   -39%

Kirjoita arvostelu

Arvosana *
Nimesi näytetään julkisesti – voit käyttää nimimerkkiä. Kutsumme ostajia kirjoittamaan arvosteluja; tarkistamme arvostelut ennen julkaisua ja julkaisemme myös kriittiset.

Lisää ACT-tuotteita tässä kategoriassa

12

Suositut tuotteet tässä kategoriassa

8
Myyjä: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Liettua · Yritystunnus 303192950 · ALV-numero LT100008198612 · Toimitus EU:sta (Liettua)
WhatsApp
Messenger
Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.
Kaikki kategoriat