ACT harmaa 10 metrin LSZH SFTP CAT6A patchkaapeli RJ45-liittimillä

The ACT Grey 10 meter LSZH SFTP CAT6A patch cable (model IB4010) is a shielded Ethernet cable designed for high-speed data transmission. It features S/FTP shielding and RJ-45 connectors on both ends, supports CAT6A performance and uses an LSZH (Low Smoke Zero Halogen) jacket to reduce toxic gas and smoke emission in case of fire. The cable is 10 meters long and comes in grey color, suitable for structured networks in homes, offices and transport environments where low-smoke materials are required. Compatible with CPR Euroclass: Eca.

Advantages

S/FTP shielding provides improved protection against electromagnetic interference, helping maintain signal integrity over longer runs. The LSZH jacket lowers the release of hazardous halogenated gases and smoke during combustion, increasing safety in confined or poorly ventilated spaces. RJ-45 termination on both ends ensures compatibility with standard network equipment, and CAT6A specification supports higher bandwidth for modern networking needs.

Suitable for

• Wired local area networks in homes and offices
• Installations in transport vehicles and other confined or poorly ventilated areas
• Network connections requiring CAT6A performance for high-speed data

Key specifications

• Manufacturer: ACT
• Model / MPN: IB4010
• Type: S/FTP patch cable, CAT6A
• Length: 10 m
• Connectors: RJ-45 — both ends
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Colour: Grey
• CPR Euroclass: Eca
• EAN: 8716065307092

How to use

Connect one RJ-45 connector to a network port on a switch, router or wall outlet and the other RJ-45 connector to the target device such as a computer or access point. Ensure connectors are fully inserted until they click to secure the connection. Route the cable without sharp bends and avoid placing under heavy objects or near high-power electrical equipment to minimise interference and physical damage.

Recommendations

Use this CAT6A LSZH S/FTP patch cable for high-speed links where reduced smoke and halogen emissions are required; avoid excessive bending radius and protect connectors during installation to maintain performance.