ACT keltainen 25 metrin SFTP CAT6A -verkkokaapeli ilman lukituskielekettä RJ45-liittimillä

The ACT Yellow 25 meter SFTP CAT6A patch cable is a shielded Ethernet cable designed for high-speed networking. It combines full copper AWG#26 conductors, SFTP shielding and 50µ gold-plated RJ-45 contacts to ensure reliable 10 Gbps data transmission and reduced interference. The cable is 25 m long and comes in a yellow jacket for easy identification in patch panels, racks and structured cabling installations.

Advantages

Full copper AWG#26 wires provide consistent signal quality and lower attenuation compared with cheaper conductors. The SFTP design (shielded foil with braided drain) together with 50µ gold-plated RJ-45 contacts improves immunity to electromagnetic interference and corrosion resistance. Cables are 100% tested and ACT specifications are independently verified, ensuring conformity to performance expectations for CAT6A installations.

Suitable for

• Data centre uplinks and switch-to-switch connections
• Server connections and rack patching
• High-speed home and office networks supporting 10 Gbps
• Structured cabling where cable colour coding is required

Key specifications

• Standard: CAT6A, SFTP
• Cable length: 25 m
• Conductor: full copper AWG#26
• Contacts: RJ-45 with 50µ gold plating
• Connectors: RJ-45 to RJ-45 (snagless)
• Brand / MPN / EAN: ACT / FB6825 / 8716065276985

How to use

Connect one RJ-45 end to the network device (switch, router or server) and the other end to the destination port. Ensure connectors are fully inserted until the latch clicks. Route the 25 m cable to avoid sharp bends, excessive pulling and sources of strong electromagnetic interference. For best performance, maintain proper separation from power cables and follow standard structured cabling practices.

Recommendations

For installations requiring guaranteed CAT6A performance at 10 Gbps, use this SFTP CAT6A cable for short to medium runs up to 25 m and verify link speeds with network testing tools after installation. Label both ends to simplify future maintenance and cable management.