Adapterikaapeli USB 2.0 Type-A sarjaporttiin RS-232 DeLOCK 63497

This USB 2.0 Type-A to serial RS-232 adapter cable by DeLOCK provides a simple connection between a USB 2.0 host and a device with an RS-232 interface. The cable is 0.5 m long, finished in black, and includes three tinned open wire ends for direct wiring to RS-232 connectors or terminal blocks. It is suitable for creating custom adapters and cable assemblies or for direct device connections where an RS-232 port must be accessed via USB.

Advantages

The DeLOCK 63497 adapter cable enables reliable serial-to-USB data transfer and supports flexible wiring thanks to tinned open ends. Its compact length and standard USB Type-A connector make it easy to integrate with PCs, embedded systems, and industrial equipment. The black jacket provides a discreet appearance for mixed professional and home environments.

Suitable for

• Connecting legacy RS-232 devices (modems, sensors, industrial controllers) to USB ports
• Producing custom cable assemblies and individual adapters
• Field service, development and testing where temporary serial connections are needed

Key specifications

• Brand: DELOCK
• Model / MPN: 63497
• EAN: 4043619634972
• Connector 1: USB 2.0 Type-A
• Connector 2: RS-232 (three tinned open wire ends)
• Length: 0.5 m
• Colour: Black

How to use

Plug the USB Type-A connector into the host computer or USB hub. Connect the tinned open wire ends to the RS-232 device connector or to a suitable terminal block according to the device pinout. Verify signal ground and transmit/receive lines before powering the device. No external driver is specified in the source data; install any required drivers provided by the device or operating system if needed.

Recommendations

For stable communication, keep the cable length minimal and avoid routing near high-power cables. Confirm RS-232 signal levels and pin assignments of the target device prior to making permanent connections. Use strain relief or cable clamps when installing in fixed or industrial settings to prevent damage to the tinned wire ends.