ADATA ASU650SS-512GT-R sisäinen SSD-levy 512 GB 2,5" Serial ATA III 3D NAND

The ADATA Ultimate SU650 512 GB 2.5" SATA 6Gb/s (ASU650SS-512GT-R) is a solid-state drive designed to upgrade laptops and desktops. It uses 3D NAND Flash to provide improved efficiency and reliability over 2D NAND drives, offering up to 520 MB/s sequential read and 450 MB/s sequential write speeds for faster booting, file transfers and application loading. The drive has no moving parts, which reduces power consumption and improves resistance to shock and vibration while helping protect stored data.

Advantages

3D NAND architecture delivers a better cost-performance ratio and increased endurance compared with traditional 2D NAND SSDs. An intelligent SLC caching algorithm boosts real-world read/write performance by operating part of the NAND in single-level cell mode. Built-in ECC (error correction code) detects and corrects errors to maintain data integrity and extend lifespan; the SU650 has an MTBF of up to 2,000,000 hours. The SSD is silent, consumes little power and tolerates shock (1500G/0.5ms) and a wide operating temperature range.

Suitable for

• Upgrading laptops and desktop PCs from HDD to SSD
• Improving system responsiveness for everyday computing and office tasks
• Faster file transfers and application/game loading

Key specifications

• Model: ADATA Ultimate SU650 ASU650SS-512GT-R
• Capacity: 512 GB
• Form factor: 2.5"
• Interface: SATA 6Gb/s
• Sequential read speed: up to 520 MB/s
• Sequential write speed: up to 450 MB/s
• Weight: 0.0595 kg
• MTBF: up to 2,000,000 hours

How to use

Install the SU650 into a compatible 2.5" drive bay or use a suitable adapter/enclosure for other form factors. Connect the drive to a SATA 6Gb/s port and power connector, then initialize and format the drive in your operating system. For users migrating from an HDD, use the ADATA Migration Utility to clone the existing drive including the operating system. Monitor drive health and firmware updates using ADATA SSD Toolbox.

Recommendations

For best results, connect the SSD to a SATA 6Gb/s controller and enable AHCI mode in the system BIOS/UEFI. Use ADATA SSD Toolbox to check wear level and firmware; perform periodic backups before major system changes or firmware updates.