GEMBIRD SATA III -datakaapeli, metalliklipsit, 30 cm – bulkkipaketti

The Cablexpert CC-SATAM-DATA-0.3M is a 0.3 m Serial ATA (SATA III) data cable with male connectors on both ends. It supports SATA III transfer rates up to 600 MB/s and is backward compatible with SATA II. The compact pink cable is intended for internal PC connections such as hard drives and SSDs and offers a simple, space-saving solution for short internal runs.

Advantages

This SATA cable supports high-speed SATA III transfers up to 600 MB/s while remaining compatible with SATA II devices. The 0.3 m length reduces cable clutter inside the case and simplifies routing. Connectors on both ends are standard SATA male types, ensuring compatibility with most internal storage devices. The pink colour helps identify or match cables within a build.

Suitable for

• Connecting 2.5" or 3.5" SATA hard drives
• Connecting SATA SSDs
• Short internal connections where a compact cable is preferred

Key specifications

• Cable type: SATA III (backward compatible with SATA II)
• Maximum transfer rate: up to 600 MB/s
• Cable length: 0.3 m
• Connector type: SATA male to SATA male
• Product colour: Pink
• Brand/MPN: GEMBIRD / CC-SATAM-DATA-0.3M

How to use

Power off the computer and disconnect it from the mains. Connect one end of the SATA cable to the SATA port on the motherboard or host controller and the other end to the SATA device (HDD or SSD). Reconnect power and power on the system. Verify the drive is recognised in BIOS/UEFI or the operating system. Route the cable to avoid sharp bends and to maintain airflow within the case.

Recommendations

Use this short 0.3 m cable for internal, short-distance connections inside a PC to minimise clutter. For longer runs choose a longer SATA cable. Avoid excessive bending near the connectors and keep the cable clear of cooling fans.