Akkulaturi Einhell CE-BC 15 M 12 V musta punainen

The Einhell CE-BC 15 M Battery Charger is an intelligent, microprocessor-controlled 12 V charger designed for modern vehicle batteries. It supports gel, AGM, maintenance-free and low-maintenance lead-acid batteries and automatically adapts to the battery voltage of 12 V vehicles. The unit provides a detailed LED charge status display and includes safety features such as overcharge, short-circuit and reverse-polarity protection.

Advantages

The charger uses a multi-stage, battery-friendly charging cycle that is monitored and adjusted by its smart control electronics to extend battery lifetime. A trickle charge function maintains an optimum charge level during long lay-up periods, reducing the risk of deep discharge and premature battery replacement. The device also provides a jump-start mode with up to 100 A starting current (max. 5 seconds) for immediate engine start assistance, and fully insulated clamps for safe connection.

Suitable for

• Cars with 12 V batteries
• Motorbikes and scooters
• Seasonal vehicles and vehicles in long storage
• Gel, AGM, maintenance-free and low-maintenance lead-acid batteries

Key specifications

• Nominal voltage: 12 V
• Jump-start current: 100 A (max. 5 s)
• Input voltage: 230 V AC, 50 Hz
• Supported battery types: Gel, AGM, maintenance-free and low-maintenance lead-acid
• Protection: overcharge, short circuit, reverse polarity
• Display: LED battery voltage and charge status
• Colour: Black, Red

How to use

Connect the charger to a 230 V AC outlet, then attach the fully insulated clamps to the battery terminals observing correct polarity. The microprocessor-controlled unit will analyze the battery and select the appropriate charging mode automatically. Monitor the LED display for voltage and charge status. Use the jump-start mode only for short bursts (maximum 5 seconds) when immediate engine start assistance is required. After charging, disconnect the mains supply before removing the clamps.

Recommendations

For best results, use the CE-BC 15 M to maintain batteries during long storage periods and enable the trickle charge function where available. Observe the correct polarity when connecting clamps and follow vehicle manufacturer instructions regarding battery maintenance.