Akkulaturi Einhell CE-BC 30 M 12/24 V

The Einhell CE-BC 30 M Battery Charger is a microprocessor-controlled charger for 12 V and 24 V vehicle batteries. Designed for modern, high-performance batteries, it supports gel, AGM, maintenance-free and low-maintenance lead-acid batteries and provides automatic multi-stage charging with status indication. The unit offers fast, battery-friendly charging, trickle charge maintenance and a jump-start mode delivering up to 100 A for short starting assistance. Built-in protections include overcharge, short circuit and reverse polarity protection, and fully insulated clamps simplify safe connection.

Advantages

The intelligent control electronics automatically analyze battery type and condition and select the appropriate charging mode, ensuring optimal charge cycles and extended battery life. A trickle charge function maintains the battery at an optimum level during long standstills, reducing the risk of deep discharge. The charger provides clear LED indications of voltage and charge status and includes safety features to protect both the battery and the charger during operation.

Suitable for

• Charging and maintaining 12 V and 24 V car batteries
• Gel, AGM, maintenance-free and low-maintenance lead-acid batteries
• Seasonal vehicles (cars, motorcycles, scooters) during long lay-up periods
• Providing short-term jump-start assistance for vehicles

Key specifications

• Brand: EINHELL
• Model: CE-BC 30 M (MPN 1002275, EAN 4006825643350)
• Battery voltage: 12 V / 24 V
• Starting current (jump-start): 100 A (max. 5 seconds)
• Input voltage / frequency: 230 V ~ / 50 Hz
• Weight: 10.8 kg
• Package dimensions (W x D): 375 mm x 430 mm

How to use

Connect the fully insulated clamps to the battery terminals with the charger switched off, observing correct polarity. Switch on the charger and read the LED display to confirm battery voltage and selected charging mode. The microprocessor will automatically run the multi-stage charging cycle and adjust charging current according to battery condition. For jump-start mode, follow the display and only allow the short high-current pulse as required (maximum 5 seconds). After charging is complete or when maintaining charge with trickle mode, switch off the charger and disconnect the clamps, removing the negative clamp first.

Recommendations

Use the Einhell CE-BC 30 M in dry, well-ventilated areas and follow vehicle and battery manufacturer instructions. Do not connect the clamps with the charger switched on. Regularly check battery condition during extended storage and use the trickle charge function to avoid deep discharge and prolong battery life.