Audiokaapeli Omnitronic 30225197 5 m XLR (3-napainen) 6,35 mm musta

The Omnitronic 30225197 5m audio cable combines a 3-pin XLR male connector with a 6.35mm (1/4") male plug and a robust black jacket to provide a reliable signal path for microphones, instruments and other audio devices. With a 5 m length it offers flexible reach for stage setups and studio connections while maintaining consistent sound transmission and mechanical durability suitable for frequent use.

Advantages

This cable provides a balanced XLR connection on one end and an instrument/line 6.35mm connection on the other, allowing direct hookup between pro audio gear without adapters. The 5 m length gives a practical compromise between mobility and signal integrity. The black outer sheath resists wear and keeps the cable discreet on stage. Durable connector housings and strain relief reduce risk of damage from bending or pulling during live performances or repeated patching in the studio.

Suitable for

Key specifications

How to use

Connect the XLR male end to the XLR output of a microphone, preamplifier or other equipment, and insert the 6.35mm plug into the corresponding instrument or line input on an amplifier, mixer or PA system. Ensure both devices are powered down or volume is lowered before connecting to prevent transient noises. Route the cable away from high-interference sources and avoid sharp bends; use cable ties or clips to secure runs on stage or in the studio.

Recommendations

For optimal performance, keep the cable as straight as possible and avoid kinking. When storing, coil the cable loosely to prevent internal conductor stress. If used on stage, allow enough slack to prevent accidental disconnection and periodically inspect connectors for secure contacts and intact strain relief.