BlueOptics InfiniBand kuitu-kaapeli 10 m QSFP28 akva

The BlueOptics InfiniBand Fibre Optic Cable 10m QSFP28 Aqua is a 10‑metre active optical cable (AOC) with QSFP28 male connectors on both ends. Designed for 100GBASE‑SR4 applications, the cable uses multimode fiber with integrated transmitters and receivers to deliver high‑speed optical links suitable for data center switches, routers and storage systems that support QSFP28 AOC interfaces. The aqua cable jacket and QSFP28 form factor follow MSA guidelines to ensure mechanical and electrical interoperability.

Advantages

This QSFP28 AOC provides a pre‑terminated fibre connection that avoids field termination and patching, reducing insertion loss and exposure to contamination. The cable supports simultaneous send and receive channels for 100 Gbit/s aggregated throughput and includes Digital Diagnostics Monitoring (DDM/DOM) compliant with SFF‑8472 for real‑time monitoring of voltage, temperature, laser bias current and optical power. Components are selected to meet industry standards and the AOC is produced to MSA specifications for predictable compatibility and operational life.

Suitable for

• 100G network links between QSFP28 ports in data centre switches and routers
• High‑performance storage area network (SAN) connections and Fibre Channel over Ethernet (FCoE)
• Short‑reach interconnects within racks and between adjacent racks (up to 10 m)
• Low‑latency computing clusters and InfiniBand environments requiring QSFP28 connectivity

Key specifications

• Connector type: QSFP28 to QSFP28 (male/male)
• Cable type: Active Optical Cable (AOC) with multimode fiber
• Data rate: up to 100 Gbit/s (100GBASE‑SR4 compatible)
• Length: 10 metres
• Monitoring: Digital Diagnostics Monitoring (DDM/DOM) compatible
• Compliance: Multi‑Source Agreement (MSA) QSFP28 AOC mechanical/electrical specifications
• Typical use environment: data centre and networking racks

How to use

Install the BlueOptics QSFP28 AOC by inserting each QSFP28 connector into the corresponding QSFP28 port on your devices until the latch engages. Ensure both devices support QSFP28 AOC modules and DDM/DOM if monitoring is required. Route the 10 m cable to avoid sharp bends and maintain the manufacturer’s minimum bend radius. No additional fiber termination or cleaning of patch cords is required for the pre‑assembled cable, but inspect connector housings for visible debris before insertion to avoid contamination.

Recommendations

Confirm hardware compatibility with QSFP28 AOC modules in the switch or router vendor documentation and enable DDM/DOM in management interfaces where available to monitor link health. Avoid tight bends, excessive pulling force, and exposure to liquids or dust. For critical links, consider testing a sample AOC in your environment before large deployments to validate performance and compatibility.