Bosch 2 608 900 336 poranteräsarja tasapora 13 kpl

The Bosch 2 608 900 336 spade drill bit set contains 13 flat wood bits designed for drilling clean, precise holes in softwood. Sizes cover a practical range from 10 mm up to 32 mm, allowing users to choose the appropriate diameter for dowels, cable passages, hinge recesses and other woodworking tasks. The bits are arranged in a compact package optimized for storage and transport, with each bit shaped to remove chips efficiently and reduce tear-out.

Advantages

The set provides a wide span of diameters in one kit, reducing the need to switch tools or buy individual bits. Each spade bit is engineered to deliver fast material removal and straight drilling in softwood while producing smooth hole edges. The compact packaging keeps the bits organized and protected during transport and storage.

Suitable for

• Drilling holes for dowels and fasteners in softwood
• Making openings for cable and pipe routing through timber
• Preparing hinge and lock recesses in doors and frames
• General carpentry and joinery tasks requiring 10–32 mm holes

Key specifications

• Number of pieces: 13
• Diameter range: 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 28 mm, 30 mm, 32 mm (13 sizes covering 10–32 mm)
• Intended material: softwood
• Bit type: spade (flat) drill bits
• Package dimensions: approximately 345 mm × 300 mm × 20 mm

How to use

Select the bit with the required diameter and secure it in the drill chuck according to the drill manufacturer's instructions. Mark the drilling point on the workpiece, clamp the workpiece firmly to prevent movement, and start drilling at a steady speed appropriate for softwood. Apply light, consistent pressure and withdraw the bit periodically if necessary to clear chips. After drilling, deburr the hole edges as needed.

Recommendations

Use this spade bit set with a variable-speed drill; lower speeds help maintain control and reduce splintering in softwood. Ensure the workpiece is well supported and use a backing board when drilling through to minimize exit tear-out. Store the bits in their original case to keep the cutting edges protected and to maintain organization.