CyberPower PR3000ELCDSXL UPS (keskeytymätön virransyöttö) Line-Interactive 3 kVA 2700 W 9 AC-lähtöä

The CyberPower PR3000ELCDSXL Line-Interactive UPS delivers reliable power protection for office systems, including PCs, workstations, networking equipment and peripherals. With a 3 kVA / 2700 W output capacity, sealed lead-acid battery, and nine AC outlets (C13 and C19), it supports short-term backup — typically around 2 minutes at full load and 7 minutes at half load — and is supplied in a tower form factor with a 3.05 m power cable. The unit is CE and RoHS compliant and designed for deployment in back offices, server rooms and data center environments.

Advantages

The UPS provides pure sine wave output and line-interactive voltage regulation to ensure stable, clean power to sensitive equipment. Local management is available through USB and serial ports, while remote monitoring and control can be enabled using an optional SNMP remote management card together with PowerPanel Management software. Certified interoperability with Cisco devices helps integrate the UPS into networked infrastructures and optimize energy performance.

Suitable for

• Office PCs and workstations
• Network devices (switches, routers) and small server racks
• Peripherals and critical office equipment
• Back office and small data center installations

Key specifications

• Output power capacity: 3 kVA / 2700 W
• AC outlets: 9 (combination of C13 and C19)
• Battery type: sealed lead-acid
• Typical backup time: ~2 minutes at full load, ~7 minutes at half load
• Form factor: tower
• Cable length: 3.05 m
• Compliance: CE, RoHS
• Ports: 1 x USB 2.0, serial port
• Color: Black
• Weight: 26.8 kg

How to use

Place the UPS on a stable, level surface with adequate ventilation and connect your equipment to the provided AC outlets. Connect the UPS to mains power using the integrated power cable and switch the unit on. For local monitoring, connect a PC via the USB or serial port and install the CyberPower PowerPanel Management software. For remote management, fit the optional SNMP remote management card and configure network access through the PowerPanel software to enable real-time monitoring, event logging and remote shutdowns.

Recommendations

To ensure reliable operation, perform initial battery charge per the manufacturer’s instructions, verify connected load does not exceed the 2700 W rating, and schedule periodic battery tests and firmware/software updates. Use the optional SNMP card where remote monitoring or integration with Cisco network equipment is required.