DeLOCK 0,1 m SATA M/M SATA-kaapeli keltainen

The DeLOCK 0.1m SATA M/M cable in yellow is a thin, flexible internal data cable designed to connect SATA devices such as hard drives, controller cards or flash storage to a motherboard or controller. It supports the SATA 6 Gb/s standard while remaining backward compatible with earlier SATA versions; actual transfer speed depends on the connected devices. Metal clips on the SATA connectors provide additional snap-in retention.

Advantages

The cable supports data transfer rates up to 6 Gb/s and is compatible with earlier SATA generations. Its short 0.1 m length and slim design make it suitable for compact builds or situations with limited space. Metal clips on the connectors ensure a secure connection during installation and operation.

Suitable for (tasks / use cases)

• Connecting internal SATA HDDs or SSDs to a motherboard
• Linking SATA controller cards to drives
• Internal connections in small form-factor or compact PC builds

Key specifications

• Cable length: 0.1 m
• Standard: SATA 6 Gb/s (backward compatible)
• Connector type: SATA male to SATA male
• Colour: Yellow
• Retention: Metal clips on connectors

How to use

Align each SATA connector with the corresponding SATA port on the drive and motherboard or controller, then press until the metal clips engage to secure the connection. Ensure devices and the system are powered off before connecting or disconnecting the cable. After installation, power on the system and verify the drive is recognized in the BIOS or operating system.

Recommendations

Use this short 0.1 m SATA cable when you need a compact, neat internal connection with minimal cable clutter. For maximum transfer speeds, connect devices that both support SATA 6 Gb/s. Avoid excessive bending near the connectors to prolong cable life.