Digitus verkkokaapeli CAT 5e SF/UTP patch-kaapeli RJ45 Cat5e 0,5 m sininen

The DIGITUS Network Cable CAT 5e SF/UTP Patch Cord RJ45 Cat5e 0.5m in blue is a Category 5e patch cable manufactured and tested to ISO/IEC 11801 and DIN EN 50173 standards. It supports performance up to 100 MHz, uses copper conductors and is PoE ready. The connector is transparent blue with metal shielding for easy identification of Category 5e and improved shielding.

Advantages

The patch cord delivers verified Cat5e/Class D performance including near-end crosstalk (NEXT) characteristics up to 100 MHz. It is equipped with a molded boot that provides kink protection, strain relief and a latch protector to prevent the latching lever from breaking. SF/UTP shielding reduces external interference and the copper conductor ensures reliable signal transmission.

Suitable for

• Short interconnections in patch panels, switches and routers
• Office and home network connections requiring Cat5e performance
• PoE devices such as IP phones and access points

Key specifications

• Standard: Category 5e / Class D (ISO/IEC 11801, DIN EN 50173)
• Performance: up to 100 MHz
• Shielding: SF/UTP
• Conductor: Copper (Cu)
• Connector: RJ45 with metal-shielded transparent blue plug
• Length: 0.5 m
• PoE: supported
• Manufacturer MPN: DK-1531-005/B
• EAN: 4016032213703

How to use

Plug one RJ45 connector into your network device (switch, router, patch panel) and the other into the corresponding port on the connected equipment. Ensure connectors are fully inserted until the latch clicks and route the cable to avoid sharp bends; the molded boot provides kink protection and strain relief. Use the 0.5 m length for short connections where a compact cable run is required.

Recommendations

For optimal performance, avoid running the cable parallel to power lines or sources of strong electromagnetic interference. Verify Cat5e channel compliance in structured cabling installations and use appropriate patch panels and jacks rated for Category 5e.