DisplayPort-kaapeli VALUE DP-DVI (24+1) LSOH 3 m

The VALUE DisplayPort Cable DP-DVI (24+1) LSOH 3m connects a graphics card or other DisplayPort source to a DVI-D monitor or projector, supporting a maximum resolution of 1920x1080 at 60Hz. The 3-meter length provides flexibility in device placement while the LSOH (Low Smoke Zero Halogen) jacket reduces smoke and toxic emissions in case of fire. The cable is lightweight and intended for reliable digital video transmission between DisplayPort and single-link DVI-D interfaces.

Advantages

This 3 m VALUE cable offers a stable digital connection from DisplayPort to DVI-D (24+1) without active conversion electronics, ensuring straightforward plug-and-play use with compatible devices. The LSOH outer material minimizes smoke and corrosive gases, making it suitable for indoor installations where safety standards are a concern. Its compact design and 200 g weight make handling and routing simple.

Suitable for

• Connecting a PC or graphics card with DisplayPort output to a DVI-D monitor or projector
• Home offices, small office workstations, and education environments
• Setups requiring up to 1920x1080 @60Hz single-link DVI resolution

Key specifications

• Connector: DisplayPort (male) to DVI-D (24+1) (male)
• Length: 3 m
• Maximum resolution: 1920x1080 @60Hz (single-link DVI)
• Jacket material: LSOH (Low Smoke Zero Halogen)
• Weight: approx. 200 g
• Brand: VALUE
• MPN: 11.99.5616
• EAN: 7611990129744

How to use

Connect the DisplayPort end to the DisplayPort output on your graphics card or source device and plug the DVI-D end into the monitor or projector. Ensure both devices are powered on and set the monitor to the correct input. If the display does not appear automatically, check display settings on the source device and verify the cable seating at both ends. This cable supports single-link DVI resolution up to 1920x1080 @60Hz; do not expect higher DVI dual-link resolutions.

Recommendations

For best results, use with devices that natively support DisplayPort output and DVI-D input. Avoid sharp bends and excessive tension on the cable; keep connectors clean and firmly seated. For applications requiring higher than 1920x1080 resolution, consider a native DisplayPort-to-DisplayPort cable or an active converter supporting dual-link DVI or higher bandwidth.