Ethernet-kaapeli ProXtend CAT6A RJ-45 1,5 m vihreä

The ProXtend CAT6A S/FTP CU LSZH Ethernet Cable (1.5 m) with RJ-45 connectors provides high-speed wired connectivity up to 10000 Mbit/s. Constructed from 99.9% pure copper strands (AWG 26) and featuring S/FTP shielding, the cable is built for stable 10GBase-T performance and reduced electromagnetic interference. The LSZH outer jacket limits smoke and toxic gases in case of fire, and the vibrant green jacket identifies the 1.5 m cable in installations.

Advantages

This ProXtend CAT6A cable uses 99.9% pure copper conductors and AWG 26 to maintain signal integrity at high data rates. The S/FTP design combines overall foil shielding with individually screened pairs to minimise EMI. LSZH jacket material reduces smoke and halogen emissions for safer indoor use. Connectors feature thick 50µ" gold plating for improved contact durability and transmission quality, and the cable supports PoE+ for powered devices.

Suitable for

• 10GBase-T network connections in offices and server rooms
• PoE+ powered devices such as IP phones, cameras and access points
• Structured cabling runs where LSZH jacket is required
• Short patch connections between switches, patch panels and endpoints (1.5 m)

Key specifications

• Length: 1.5 m
• Connectors: RJ-45 to RJ-45
• Data rate: up to 10000 Mbit/s (10GBase-T)
• Conductor: 99.9% copper, AWG 26
• Shielding: S/FTP (overall foil + individually shielded pairs)
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Contact plating: 50 µ" gold
• Colour: Green

How to use

Connect one RJ-45 connector to your network device (switch, router, patch panel) and the other to the endpoint (computer, NAS, access point). Ensure connectors are fully inserted until the latch clicks to secure the snagless design. For best performance, avoid sharp bends and excessive tension on the cable; keep run lengths within recommended distances for structured cabling.

Recommendations

Use this ProXtend CAT6A S/FTP CU LSZH cable for short fixed patch runs and PoE+ deployments in indoor environments where low smoke and halogen emissions are required. Avoid installing the cable outdoors or in direct sunlight; maintain bend radius and strain relief to preserve signal quality.