Filamenttikela Gembird PLA 1,75 mm punainen 1 kg 3D-tulostukseen

Gembird PLA filament, 1.75 mm diameter on a 1 kg spool in red, is a general-purpose material for FDM/FFF 3D printing. Made from polylactic acid (PLA), this filament is compatible with a wide range of printers that accept 1.75 mm filament and is suitable for printing prototypes, models and many functional parts where PLA mechanical and thermal properties meet requirements. The spool is manufactured for consistent diameter and roundness to provide reliable feeding and stable extrusion during high-speed printing.

Advantages

This PLA filament offers improved melt behavior that supports higher printing speeds and better layer adhesion at recommended settings. High precision roundness and low bubble content contribute to steady extrusion and consistent surface finish. The material has low odor and a relatively low melting temperature, which simplifies printing and reduces the need for specialized hotend temperatures. The vivid red color delivers good visual contrast for models and prototypes.

Suitable for

Key specifications

How to use

Load the 1.75 mm filament onto your printer according to the manufacturer's instructions for filament installation. Set print temperatures, speeds and cooling based on your printer model and nozzle diameter; typical starting values for PLA are a nozzle temperature around 190–220°C and a heated bed temperature of 0–60°C if used. Calibrate extrusion multiplier and retraction settings to match your hotend and print speed. Use standard slicer profiles for PLA and adjust speed settings upward gradually to take advantage of the filament's improved melt flow while monitoring print quality.

Recommendations

For best results, store the filament spool in a dry place or sealed bag with desiccant to avoid moisture absorption. When printing at very high speeds, ensure your printer's cooling, filament feed path and hotend are suited to maintain stable melt and extrusion. Perform test prints when switching to extreme speed modes and adjust retraction and acceleration to reduce stringing and ringing. This filament is intended for applications where PLA properties are acceptable; avoid prolonged use in high-temperature environments.