Fischer 532729 GK Green S K NV kipsilevyankkurisarja 22 mm (10 kpl)

Fixing into plasterboard often means choosing between weak plastic plugs that spin in the board or bulky metal anchors that need special tools. The Fischer GK Green S K NV set solves this with a self-drilling nylon anchor and matching screw that installs directly into the panel without pre-drilling.

Who is it for

This set suits electricians, carpenters and DIYers who mount light fixtures, pictures, cable channels or small shelves onto single or double-layer plasterboard and gypsum fibreboards. The short 22 mm anchor length keeps the fixing entirely within the panel, so it works even in narrow cavities.

Main features

• Self-drilling anchor with sharp self-tapping thread cuts its own hole in plasterboard and gypsum fibreboards.
• High-quality nylon (PA6) anchor in green for easy identification.
• Zinc-plated pan head screw, 4.5 mm diameter, 35 mm length, PZ2 drive.
• No pre-drilling required for the anchor – simply screw in with a Pozi-drive bit.
• For panel thicknesses from 9.5 mm to 25 mm.
• Load capacity up to 8 kg tensile and 15 kg shear in 12.5 mm plasterboard.

Specifications

• Product type: Plasterboard anchor set
• Anchor type: Self-drilling
• Anchor material: Nylon (PA6)
• Anchor colour: Green
• Anchor length: 22 mm
• Screw type: Pan head
• Screw diameter: 4.5 mm
• Screw length: 35 mm
• Screw drive: PZ2 (Pozi-drive)
• Screw corrosion protection: Zinc-plated
• Suitable for materials: Plasterboard, gypsum fibreboards
• Minimum panel thickness: 9.5 mm
• Maximum panel thickness: 25 mm
• Recommended load (12.5 mm plasterboard): 8 kg tensile, 15 kg shear
• Installation method: Direct screw-in, no pre-drilling for anchor
• Quantity per pack: 10 anchors and 10 screws

Tips

Use a PZ2 bit and a low-torque setting on your drill to avoid over-tightening. The anchor is designed for light to medium-duty fixings; for heavier loads, consider a metal cavity fixing.