GEMBIRD 3D-tulostusfilamentti PLA 1,75 mm valkoinen 1 kg

GEMBIRD 3D printing filament PLA 1.75 mm White 1 kg is a polylactic acid (PLA) filament supplied on a 1 kg spool in white color and 1.75 mm diameter. The filament is designed for FDM/FFF 3D printers that accept 1.75 mm filament and is suitable for general-purpose prototyping, hobby prints and functional parts where standard PLA properties are appropriate. The material offers improved melt characteristics and high roundness for consistent feeding and steady extrusion at elevated print speeds.

Advantages

This PLA filament features improved melting behavior that supports higher printing speeds and stable flow, reducing the likelihood of under-extrusion during fast moves. High precision roundness and a bubble‑free formulation contribute to reliable layer deposition and consistent surface finish. The filament is compatible with a wide range of printer brands and systems, including high-speed machines and CoreXY layouts.

Suitable for

Key specifications

How to use

Load the 1.75 mm PLA filament into any FDM/FFF printer configured for that diameter. Recommended extrusion temperatures and print settings depend on the specific printer, hotend and slicing profile; start with common PLA temperature ranges and tune as needed. Ensure the filament feeds smoothly from the spool and that the feeding path is free of sharp bends. Use appropriate bed adhesion methods for PLA, such as blue tape, PEI sheet or a light adhesive, and level the build plate before starting the print.

Recommendations

For best results when printing at higher speeds, verify that your printer’s hotend and feeder can support rapid filament flow. Store the spool in a dry environment or sealed container with desiccant to avoid moisture uptake. If stringing or oozing occurs at high speeds, adjust retraction and temperature settings incrementally until the print quality is acceptable.