Hallittava 2,5G Ethernet-kytkin TP-Link ES210X-M2 — 8x 2,5G (100/1000/2500), 80 Gbit/s, pöytä-/seinäasennus

TP‑Link ES210X‑M2 is a managed 2.5G Ethernet switch that provides eight RJ‑45 ports capable of 100/1000/2500 Mbps operation and a switching capacity of 80 Gbit/s. The switch includes a 16,000‑entry MAC address table and implements IEEE 802.1p for priority handling. Built in a black metal enclosure with a fanless design, the device supports desktop or wall mounting and is intended for small office, home office and SMB networks that require multi‑gig connectivity and traffic prioritization.

Advantages

The ES210X‑M2 combines multi‑gig RJ‑45 ports with managed switching features to enable higher throughput without replacing existing cabling. Its managed capabilities let administrators configure VLANs, priority handling and IGMP snooping to optimize traffic flow. The fanless metal housing and compact desktop/wall‑mount form factor reduce noise and allow flexible installation in constrained spaces. A 16,000‑entry MAC table and 80 Gbit/s switching capacity support stable forwarding and concurrent traffic across all ports.

Suitable for

• Small office and home office networks requiring faster-than-gigabit LAN speeds
• SMB deployments needing VLAN segmentation and QoS prioritization
• Workstations, NAS devices or access points that benefit from 2.5G uplinks
• Environments where silent, fanless operation and wall or desktop mounting are preferred

Key specifications

• Switch type: Managed
• Ports: 8 × RJ‑45 supporting 100/1000/2500 Mbps
• Switching capacity: 80 Gbit/s
• MAC address table: 16,000 entries
• Networking standards: IEEE 802.1p (priority handling)
• Design: Fanless, metal casing, desktop or wall mount
• Color: Black

How to use

Install the switch on a desktop or secure it to a wall using the provided mounting points. Connect your network devices to the RJ‑45 ports using standard Ethernet cables; the ports will negotiate at 100/1000/2500 Mbps depending on connected equipment. Access the management interface via the web UI or supported management tools to configure VLANs, QoS (IEEE 802.1p), IGMP snooping and other managed features. Ensure the device receives the supplied DC power and place it in a location with sufficient ventilation despite the fanless design.

Recommendations

For best results, use Cat5e or better cabling to achieve 2.5G speeds, segment traffic with VLANs where appropriate, and apply IEEE 802.1p priority to latency‑sensitive services. Regularly update firmware via the official TP‑Link management interface and monitor port activity to maintain stable performance.