Hama 00205273 koaksiaaliliitin F-tyyppi 4 kpl

The Hama 00205273 F-type coaxial connector pack contains four silver F-to-F connectors designed for reliable transmission of RF signals in home and professional AV setups. Each connector provides an F-type interface on both ends so that coaxial cables, antenna leads and cable TV lines can be joined securely. The compact, metal construction offers a straightforward coupling solution where a fixed, low-loss connection is required.

Advantages

These F-type connectors are made from metal with a silver finish to resist corrosion and ensure consistent electrical contact. The straight F-to-F design allows quick inline coupling of two coaxial cables without tools in many installations, while the threaded interface secures the connection against loosening. Supplied as a set of four, the pack supports multiple connections and replacements for domestic or light-commercial coaxial networks.

Suitable for

• Connecting antenna leads to tuners and TVs
• Joining two coaxial cables to extend cable runs
• Linking satellite dish feeds to receivers
• Cable television installations and repairs

Key specifications

• Connector type: F-to-F coaxial coupling
• Quantity: 4 connectors per pack
• Material / finish: metal construction with silver colour
• Interface: threaded F-type on both ends for screw coupling
• Application: RF signal coupling for 75 Ω coaxial systems

How to use

To use these F-type connectors, align the threaded F-type ends with the corresponding coaxial cable connectors or devices and screw them together until hand-tight. Ensure the cable centre conductor and shielding are properly retained in each connector before coupling. For cable-to-cable extension, attach one connector to each cable end and then thread the connectors together. Verify the connection is firm and test the signal quality with the receiver or a signal meter.

Recommendations

Use connectors on standard 75 Ω coaxial cables and avoid overtightening with tools to prevent damage to the connector or cable. Replace any connector showing signs of corrosion or loose contact. For outdoor or exposed installations, consider additional weatherproofing such as self-amalgamating tape or sealed boots to protect the connection from moisture.