HDD-/SSD-kotelo LC-Power LC-DOCK-C-35-M2 3,5 tuumaa USB Type-C 10 Gbit/s

LC-DOCK-C-35-M2 is an external HDD/SSD enclosure from LC-Power designed to accommodate a single 3.5" SATA hard drive and one M.2 NVMe SSD. The black enclosure connects to a host via USB Type-C and supports USB 3.2 Gen 2x1 data transfer rates up to 10 Gbit/s, providing a compact solution for accessing, backing up or cloning drives.

Advantages

The enclosure supports both a 3.5" SATA HDD and an NVMe M.2 SSD simultaneously and includes a standalone cloning feature to duplicate drives without a PC. USB Type-C interface and USB 3.2 Gen 2x1 (10 Gbit/s) transfer speeds enable fast file transfers. The unit's lightweight black housing offers portable, tool-free access to internal drives and is compatible with common operating systems when connected to a host device.

Suitable for

• Data backup and recovery from a 3.5" SATA HDD
• Cloning drives for migration or duplication without a computer
• Fast external storage with an NVMe M.2 SSD via USB Type-C
• Temporary expansion or testing of SATA and M.2 drives

Key specifications

• Model: LC-Power LC-DOCK-C-35-M2
• Drive bays: 1 × 3.5" SATA HDD and 1 × M.2 NVMe SSD
• Interface: USB Type-C
• Data rate: USB 3.2 Gen 2x1 — up to 10 Gbit/s
• Colour: Black
• Weight: 0.629 kg

How to use

Install the 3.5" SATA HDD and the M.2 NVMe SSD into their respective slots following the enclosure's mechanical guides, secure them as instructed in the accompanying guide, then connect the enclosure to a host computer using the supplied USB Type-C cable. For cloning operations use the dedicated clone button or sequence described in the product manual to perform a direct drive-to-drive copy without connecting to a PC. When used as external storage, the host operating system will detect the drives and allow normal file operations.

Recommendations

Use the enclosure on a stable, flat surface and avoid disconnecting the USB Type-C cable during active read/write operations. Ensure the source and target drives are compatible with the specified interfaces and confirm available power requirements for 3.5" HDDs if the enclosure requires external power.