HDMI-kaapeli claroc FEN-HDMI-20-20M 4K@60Hz, pituus 20,0 m

The claroc FEN-HDMI-20-20M high-speed HDMI cable is a 20.0 m passive cable designed to deliver 4K resolution at 60 Hz between compatible devices. It transmits uncompressed digital video and multichannel audio over a single cable, allowing placement of displays, projectors or source equipment at greater distances without intermediate converters. The cable is suitable for home entertainment systems, meeting rooms and fixed AV installations where a long, continuous HDMI connection is required.

Advantages

This 20-meters HDMI cable supports 4K@60Hz signal transfer and multichannel audio, reducing the need for multiple cables or adapters. Its long length enables flexible device placement while maintaining digital signal integrity for typical consumer and professional AV setups. The product is compatible with HDMI-equipped sources and displays and simplifies cabling in rooms that require extended reach.

Suitable for

• Home theatre systems with wall-mounted TVs or distant AV receivers
• Conference rooms and meeting spaces connecting laptops to projectors or displays
• Classroom and lecture-hall AV installations
• Fixed installations where a continuous 20 m HDMI run is needed

Key specifications

• Length: 20.0 meters
• Maximum supported video resolution: 4K (3840×2160) at 60 Hz
• Signal type: Digital HDMI with multichannel audio support
• Cable type: High-speed HDMI cable suitable for long-run passive connections
• Typical use: AV signal transmission between HDMI source and display over 20 m

How to use

Connect one end of the claroc HDMI cable to the HDMI output of your source device (such as a Blu-ray player, set-top box, game console or computer) and the other end to the HDMI input of your display, projector or AV receiver. Ensure connectors are fully inserted and secured to avoid loose contact. Power on the connected devices and select the corresponding HDMI input on the display. If required, configure display resolution and audio output settings on the source device to enable 4K@60Hz and preferred audio format.

Recommendations

For best performance, avoid tight bends and sharp kinks in the cable, and route the cable clear of high-interference sources such as large motors or unshielded power lines. If signal issues occur over long runs, verify source and display HDMI settings and consider using devices with active HDMI extension or an amplifier if compatibility with 4K@60Hz cannot be achieved with a passive cable.