HDMI-kaapeli Kramer Electronics 0,6 m

The Kramer C−HM/HM/PICO ultra-slim high-speed HDMI cable with Ethernet (0.6 m) provides an uncompressed digital link between HDMI devices. With male HDMI Type A connectors on both ends and support for resolutions up to 4K @ 60 fps (3840 x 2160), this 0.6-meter black cable is designed for connections in tight spaces while maintaining high-quality video and audio transmission.

Advantages

The slim HDMI connector head (approximately 16.0 mm wide and 8.0 mm thick) and reduced cable diameter allow easier installation behind TVs or inside cabinets, saving up to 1" of depth. The cable supports HDMI features including Ethernet channel, 3D, x.v.Color™, Deep Color, lip sync, uncompressed audio channels, Dolby TrueHD, DTS−HD and CEC, ensuring wide compatibility with consumer electronics and displays.

Suitable for

• Connecting set-top boxes, DVD/Blu-ray players or media players to TVs and monitors
• Short runs between a TV and a wall outlet or AV receiver in tight spaces
• Color-coded setups and small AV installations requiring a 0.6 m cable

Key specifications

• Length: 0.6 m
• Connectors: HDMI Type A (male) — both ends
• Maximum resolution: 4K @ 60 Hz (3840 x 2160)
• Features: HDMI Ethernet Channel, 3D, x.v.Color™, Deep Color, Lip Sync, uncompressed audio, Dolby TrueHD, DTS−HD, CEC
• Color: Black

How to use

Align the HDMI Type A connector with the HDMI port on your source device and the display, then insert firmly until seated. Use the 0.6 m cable for short-distance connections where a slim profile is needed; avoid excessive bending near the connector. Check that both devices are powered and set to the appropriate input to establish audio/video signal and any supported HDMI features.

Recommendations

For best performance, avoid sharp bends and pins in the cable; allow a gentle bend radius near the slim connector. Use the cable for short links up to 0.6 m and ensure device firmware and display settings support 4K @ 60 Hz and HD audio formats when required.