Intellinet 5-porttia Gigabit Ethernet PoE+ -kytkin 62W 4 PSE-porttia

The Intellinet 5-Port Gigabit Ethernet PoE+ Switch (model 561839) provides five Gigabit Ethernet ports for data transmission and supplies Power over Ethernet to connected devices. Four of the ports are high-power PoE+ PSE ports compliant with IEEE 802.3at/af, offering a total PoE budget of up to 62W and per-port output up to 30W. The switch supports network speeds up to 1000 Mbps on each port, basic switching with a 10 Gbit/s switching capacity, and includes protections against short circuit, overload and high voltage. Its compact desktop design and black finish make it suitable for small office and surveillance deployments where both data and power must be delivered over Cat5e or Cat6 cables.

Advantages

This Intellinet PoE+ switch combines five Gigabit Ethernet ports with four PoE+ PSE ports to power devices such as IP cameras, VoIP phones and wireless access points without separate power adapters. Compliance with IEEE 802.3at and IEEE 802.3af ensures up to 30W per port and a total power budget of 62W, while built-in protection functions reduce the risk of damage from short circuits, overloads and high-voltage events. The device supports standard Cat5e/6 cabling and delivers up to 1000 Mbps per port for reliable network performance.

Suitable for

• Powering and connecting IP surveillance cameras
• Supplying power to wireless access points and bridges
• Connecting and powering VoIP phones
• Small office LANs requiring a compact PoE switch

Key specifications

• Ports: 5 × Gigabit RJ-45 (10/100/1000 Mbps)
• PoE: 4 × PoE+ PSE ports, IEEE 802.3at/af compliant
• Total PoE budget: up to 62W; up to 30W per PoE+ port
• Switching capacity: 10 Gbit/s
• Networking standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3af, 802.3at
• Color: Black
• Weight: 0.77 kg

How to use

Place the desktop switch on a stable surface and connect it to your network router or uplink using a Cat5e or Cat6 Ethernet cable. Connect PoE-compatible devices to the PoE+ ports; devices that follow IEEE 802.3af or 802.3at will automatically negotiate and receive power without additional adapters. Non-PoE devices can be connected to the remaining port(s) for data-only links. Ensure the total power draw of connected PoE devices does not exceed the 62W budget and verify device compatibility before deployment.

Recommendations

To ensure reliable operation, distribute power-hungry devices across the PoE+ ports to avoid exceeding the 62W budget, use quality Cat5e or Cat6 cables for Gigabit performance, and install the switch in a ventilated, dry environment away from heat sources.