Iso kalvokondensaattorimikrofoni Omnitronic CM-78MK2 — studio-laulu- ja instrumenttitallennukseen

Omnitronic CM-78MK2 is a large-diaphragm condenser microphone designed for studio vocal and instrument recording. The microphone provides the sensitivity and frequency response typical of condenser designs, delivering clear and detailed capture of vocal performances and acoustic sources. Its construction and internal electronics are optimized for reduced self-noise and accurate transient response, making it suitable for a wide range of recording environments from home setups to professional tracking sessions.

Advantages

The CM-78MK2 offers a broad frequency response and high sensitivity that reveal vocal nuances and instrument timbre without excessive coloration. Its condenser capsule design provides transient precision and a low noise floor, allowing for cleaner takes at moderate preamp gain levels. Built for studio use, the microphone’s consistent polar pattern ensures reliable pickup of the intended source while helping to minimize room reflections and background noise. The microphone is compatible with standard studio preamps and phantom power supplies.

Suitable for

Key specifications

How to use

Set the Omnitronic CM-78MK2 on a stable microphone stand using a suitable shock mount and position it at an appropriate distance from the sound source — closer for intimate vocal capture, slightly farther for full-bodied acoustic instruments. Connect the microphone to a preamplifier or audio interface using a balanced XLR cable and enable 48V phantom power. Adjust input gain on the preamp to obtain a strong signal without clipping; monitor levels and listen for unwanted room reflections. Use pop filters or wind shields for vocal work to reduce plosives and maintain consistent timbre.

Recommendations

For best results, record in a treated or acoustically controlled environment and pair the microphone with a low-noise preamp. Positioning and distance have the greatest impact on tonal balance: experiment with small adjustments to find the desired proximity effect and off-axis rejection. When capturing loud sources, ensure the preamp gain and any pad (if available) are set to avoid distortion.