Itseliimautuva PET-laserkalvo Lomond A4 25 arkkia läpinäkyvä matta

Self-adhesive PET Laserjet Film Lomond A4 25 sheets Transparent Matte is a polyester (PET) printable film designed for use in laser printers. Each pack contains 25 A4 sheets with a transparent matte surface and a pressure-sensitive adhesive backing. The film combines the dimensional stability and heat resistance of PET with a matte finish to reduce glare while maintaining image clarity, enabling crisp text and graphics for labels, overlays and transparent signage.

Advantages

The transparent matte surface offers reduced reflections compared with glossy films, improving legibility under directional light. PET construction provides higher stiffness and dimensional stability than standard paper, and the film tolerates typical laser printing fusing temperatures without deformation. The self-adhesive back makes application to smooth, clean surfaces straightforward and long-lasting. Sheets are supplied in A4 size for convenient handling and feeding through most office laser printers.

Suitable for

• Indoor labels and nameplates applied to smooth surfaces
• Overlays for instruments, control panels and displays
• Transparent signage and window graphics with subdued reflection
• Craft projects and DIY items requiring durable printable film
• Short-run custom stickers and protective covers for printed material

Key specifications

• Material: polyester (PET) printable film
• Finish: transparent matte
• Sheet format: A4
• Quantity: 25 sheets per pack
• Adhesive type: pressure-sensitive permanent adhesive
• Compatible printers: laser (toner-based) printers
• Typical properties: dimensional stability, heat resistance for laser fusing

How to use

Prepare the laser printer according to the manufacturer's guidance for specialty media, selecting the appropriate paper type or media setting for polyester or laser film if available. Handle sheets by the edges to avoid fingerprints on the printable surface. Load a single sheet or small stack of A4 adhesive PET film into the printer tray, ensuring correct orientation for printing on the printable side. Allow printed sheets to cool briefly after exiting the fuser before peeling or applying to a surface. Before application, clean the target surface to remove dust, grease and moisture to ensure optimal adhesion.

Recommendations

For best results, test-print one sheet to verify printer settings and image quality. Use smooth, non-porous surfaces for long-term adhesion and avoid applying to rough, highly textured or dirty surfaces. Store unused sheets flat in a cool, dry place away from direct sunlight to preserve adhesive performance and dimensional stability.