Puutarhaletku Gardena 1362-20 15 m maanpäällinen musta

The GARDENA Drip Irrigation Line (15 m, Art. No. 1362-20) is a flexible above-ground irrigation pipe designed for watering smaller flowerbeds, vegetable patches and plant rows. With a small outer diameter of 4.6 mm (3/16") the black hose is easy to handle and install. Drippers are spaced every 30 cm and deliver a gentle flow of 1.5 l/h; the line is compatible with a Master Unit (Starter Set Art. No. 1361-20) and can be extended to a maximum total length of 30 metres. The product is supplied without fittings.

Advantages

The drip line uses an internal labyrinth technology that reduces clogging and provides self-cleaning of the emitters. Its thin, flexible tube simplifies routing through planted areas and saves space compared with thicker hoses. Consistent emitter spacing and controlled 1.5 l/h output ensure even, water-efficient irrigation for targeted root-zone watering.

Suitable for

• Small flowerbeds and balcony planters
• Vegetable rows and raised beds
• Short runs connected to a GARDENA Master Unit (Starter Set 1361-20)
• Above-ground temporary or seasonal irrigation

Key specifications

• Length: 15 m
• Outer diameter: 4.6 mm (3/16")
• Dripper spacing: 30 cm
• Dripper flow rate: 1.5 l/h per emitter
• Supply: without fittings
• Maximum expandable length with Master Unit: 30 m
• Brand / MPN: GARDENA, 1362-20

How to use

Lay the drip line above ground along the plant rows or through the bed, keeping the drippers facing the plants. Connect the pipe to a GARDENA Master Unit or appropriate connector (not included) and secure the line with pegs where necessary to maintain position. Adjust water supply and pressure according to the Master Unit instructions so each emitter provides the intended 1.5 l/h output. For extension, join additional compatible drip line up to the 30 m maximum when using the Starter Set specified.

Recommendations

Flush the line before first use and after long idle periods to remove debris. Use a pressure regulator or the recommended Master Unit settings to avoid excessive pressure. Store the hose away from direct sunlight when not in use for extended periods to prolong material life.