Jatkojohto PSSO 10 m 16 A 5x2,5 mm² CEE, punainen

PSSO extension cable, 10 m length, fitted with a CEE connector and designed for a continuous current rating of 16 A. The cable contains five conductors with a cross-section of 2.5 mm² each, assembled in a flexible sheath and finished in red to increase visibility. It is intended for temporary power distribution to portable equipment and small machinery in both indoor and outdoor environments where a CEE connection is required.

Advantages

The extension cable combines a 10 m reach with five 2.5 mm² conductors to support single-phase and possible protective or functional conductors while maintaining mechanical flexibility. The CEE connector provides a standardized, secure mating interface for compatible sockets. The red outer sheath improves visibility on work sites and helps reduce the risk of accidental damage. The cable construction is suitable for temporary installations and portable applications that require reliable 16 A supply.

Suitable for

Key specifications

How to use

Connect the CEE connector to a compatible 16 A CEE socket ensuring correct alignment and secure locking if applicable. Route the cable to the equipment, avoiding sharp edges, areas of heavy traffic, and sources of heat or oil. Uncoil the cable fully during use to prevent local heating. Use the appropriate protective devices (residual current and overcurrent protection) in the supply circuit according to local regulations. After use, disconnect the connector from the socket and store the cable coiled in a dry place away from direct sunlight and chemicals.

Recommendations

Inspect the cable and connector before each use for visible damage, cracks, exposed conductors or deformation. Do not use the cable if any damage is found. For prolonged outdoor use or when exposed to mechanical risk, protect the cable with cable ramps, covers or conduit and avoid permanent burial. Ensure compatibility with the connected equipment and the supply circuit rating.